Advanced Search

Search by Keyword Keywords:

Search Options

Find Posts from

Sort Results by

Search at a specific date

Jump to Result Number

Search in Categories Also search in sub-categories

Search Results (Searched for: hubsan x4)

BigAl

20 May 2019 21:08

T8sg v2 won’t bind to Hubsan H123D x4 jet was created by BigAl

T8sg v2 won’t bind to Hubsan H123D x4 jet

Category: Model Configs

As title. I’ve tried all YouTube vids.
Any ideas?

bbq75ca

01 Apr 2019 07:35

Replied by bbq75ca on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

hi everyone. i have a t8sg plus v2. will this model config file works on it?

Mikewoodkozar

27 Mar 2017 20:48

Wizard x220, Hubsan X4 & Micro SciSky for 7E was created by Mikewoodkozar

Wizard x220, Hubsan X4 & Micro SciSky for 7E

Category: Model Configs

Hello everyone. I'm new to this forum and I have had a blast working on these model configs.

I'm new to quads and flying in general but I've been playing around with RC nitro and electric monster trucks for over a decade.

Anyway I uploaded my model configs.

Micro SciSky

www.dropbox.com/s/2a3elbyt0lqcb55/model1.ini?dl=0

Hubsan X4

www.dropbox.com/s/tht2wekhu6x22ui/model2.ini?dl=0

And one that I couldn't find anywhere...

The Wizard x220

www.dropbox.com/s/a8wi62s3cv727jt/model3.ini?dl=0

All configs are for a Devo 7E running deviation with no extra switches but I did install the A7105 (is that right I don't remember).

Hope this helps someone out there!

DonKracho

30 Dec 2016 23:50

Replied by DonKracho on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

File Attachment:

File Name: model12.ini
File Size:4 KB

Just another config for Hubsan Quads. This was created on Devo 8 with 5.0.0 Firmware For me it works with Hubsan X4 V2, Hubsan FPV X4 (H107D), and Revell Nano Quad

Rudder DR down: Throtthe hold
Gear: Up LED on
FMOD 0: Ele/Ail: 70% DR - 40% Expo, Rudd: 60% DR - 25%, Expo, Flips disabled
FMOD 1: Ele/Ail: 100% DR - 25% Expo, Rudd: 100% DR - 0% Expo, Flips disabled
FMOD 2: Ele/Ail: 100% DR - 25% Expo, Rudd: 100% DR - 0% Expo, Flips enabled (same as FMOD1 except Flips)
Countdown timer triggered by Trottle and resetted by Rudder DR down to 3:30 min.

The hubsan4 image wasn't created by me, but I didnt find it for linking, therfore it is attached again.

parriehunter

30 Jul 2016 08:37

Replied by parriehunter on topic DEVO 7E + Hubsan X4

DEVO 7E + Hubsan X4

Category: Model Configs

Awesome let me know what you think of it.

Definitely open to ideas on how to make it better.

Soulsmoke

27 Jul 2016 10:32 - 27 Jul 2016 10:36

Replied by Soulsmoke on topic DEVO 7E + Hubsan X4

DEVO 7E + Hubsan X4

Category: Model Configs

Awesome, I have just fitted fitting 3 way switches a few days ago and was about to start looking into how to set them up.

I was also curious about disabling flips.

Pretty much exactly what I was looking for

I'll be sure to try it out. Thanks for sharing!

parriehunter

26 Jul 2016 01:15

DEVO 7E + Hubsan X4 was created by parriehunter

DEVO 7E + Hubsan X4

Category: Model Configs

Hello,

I have been playing around with the models on the DEVO 7E for my Hubsan X4. It has been quite a learning curve but I think I have got a pretty complete file here.

I have modded the 7E a bit with 2x 3 way switches added and both the A7104 and NRF modules with external antennas. Want to do the main Tx chip next.

Basically HOLD enables Tx inhibit, SW A has slow rates, high rate flips disabled and high rates with flips, SW B no function, FMOD turns the LEDs on and off.
Three timers, one to countdown current flight which can be reset using the Negative Left Vertical Trim, another for current total flight time and the third for a lifetime counter.

The screen

My Devo 7E

Let me know what you guys and girls think.

HappyHarry

12 May 2016 21:16

Replied by HappyHarry on topic Hubsan x4 model.ini for Devo10

Hubsan x4 model.ini for Devo10

Category: Model Requests

www.deviationtx.com/forum/model-configs/1227-hubsan-x4-config

champstar2828

12 May 2016 20:40 - 12 May 2016 20:40

Hubsan x4 model.ini for Devo10 was created by champstar2828

Hubsan x4 model.ini for Devo10

Category: Model Requests

Currently running the latest nightly build.
Thanks

Edrjune1

09 Feb 2016 15:57 - 09 Feb 2016 17:15

Replied by Edrjune1 on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Okay guys, I know this model has been beaten to death since it's so popular, but I am struggling to get flips working on my H107l board. I bought the board separately for a Micro FPV build and the thing flies like a dream, but I can't get it to flip I downloaded goebish's .ini with !FMODE saying that it worked on turning flips on and off. However, it just doesn't seem to make a difference. The led switch works on gear fine, but not the flips on FMODE. Any suggestions or someone with a definitely working H107L that will flip?

Edit: Okay, it works. My bad. I guess I didn't know what a throw was. I'm very pleased.

cyclops13

15 Dec 2015 20:22

Replied by cyclops13 on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

stringrazor wrote: Using the X4 model I downloaded from the configs section, the LEDs can be toggled on/off with the lower throttle trim button. If the cam board is wired as I explained, the camera can be turned on/off remotely by toggling the LEDs.

Can you please point me to this ini file?

stringrazor

01 Dec 2015 23:02

Replied by stringrazor on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

I have tried it and it does work although it's not as reliable as I'd hoped. IIRC, two switch movements (on/off or off/on) are required to change the state of the camera and there's a timing issue so I found it would work/no work at times. I didn't really play with it much though, just tried it as a curiosity.

goebish

01 Dec 2015 22:55

Replied by goebish on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

stringrazor wrote: Actually, you can do a mod. or so I've read. There's a pad on the cam board marked KEY. I've read that if you wire it to the LED + you can toggle the cam on/off with the LEDs from the Tx.

Nice tip !

stringrazor

01 Dec 2015 22:46

Replied by stringrazor on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Using the X4 model I downloaded from the configs section, the LEDs can be toggled on/off with the lower throttle trim button. If the cam board is wired as I explained, the camera can be turned on/off remotely by toggling the LEDs.

cyclops13

30 Nov 2015 20:14

Replied by cyclops13 on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

How will this work with the 7e?

mellowvision

24 Nov 2015 10:04

Replied by mellowvision on topic Hubsan X4 - for Devo 6s - Fall 2015

Hubsan X4 - for Devo 6s - Fall 2015

Category: Model Configs

reserved for final solution ini and graphics.

mellowvision

24 Nov 2015 07:44 - 24 Nov 2015 09:59

Hubsan X4 - for Devo 6s - Fall 2015 was created by mellowvision

Hubsan X4 - for Devo 6s - Fall 2015

Category: Model Configs

I've been reading threads on RCgroups and here, and have been finding a lot of info from 2012-2014, in threads that are thousands of posts long. It's really hard to weed through them and find out what solutions worked, and which ones were edited out over time. I've yet to find a perfect hubsan x4 ini, nothing that was a complete ini I could download and install and have everything set to work as I had hoped, so I thought I'd start a new thread here with the goal of posting a nice ini file at the end. I'm not quite there yet. I have a working ini that has a few issues that I'd like to work on, and I'm hoping some of you here can help.

I have been asking about this in Daryoon's 7e thread too, on RCgroups.com, on page 277+

so far this is what I have:

MIX switch is being used for a throttle safety
I have lights running off GEAR switch
D/R switch currently switches between dual rates
FMOD currently - not sure what it does, but I think it disables flips. it did before I started messing with this stuff.

What I'd like to accomplish:

1. The MIX switch throttle safety isn't safe - it cuts the throttle, but for some reason the safety value is 100, so when you flip it back, you have to hit 100 instead of -100 to overcome the safety. I'd like to have it be safe, requiring a throttle down to restart. I fixed this by editing the ini directly to remove the ! from before !THR. This seems to have done the trick.

2. I want to switch the D/R and FMODE switches... I think having D/R turn flips on and off would be a better use of the 2 position switch, and using FMODE for rates would allow 3 sets of rates instead of 2.

I am also interested in opinions on how I have the rates set, using expo20 curves, and what you'd do at the various rates. I *think* I would like expo on the rudder, elevator and aeleron, but I'm new to this all, so please tell me what you think.

This has also made me want to suggest a feature - is it possible to add a comment and date at the top of an ini file? it would be soooo useful if the ini files had a creation date, and possibly a thread url associated with it.

anyway, here is the file I have so far. I will be updating it here and on RCgroups as it progresses.

name=HUBSAN
mixermode=Advanced
icon=HUBSAN~1.BMP
[radio]
protocol=Hubsan4
num_channels=7
tx_power=10mW

[protocol_opts]
vTX MHz=5885
Telemetry=On

[channel1]
template=complex
[mixer]
src=AIL
dest=Ch1
switch=DR0
scalar=70
curvetype=expo
points=20,20
[mixer]
src=AIL
dest=Ch1
switch=DR1
usetrim=0
curvetype=expo
points=20,20

[channel2]
template=complex
[mixer]
src=ELE
dest=Ch2
switch=DR0
scalar=70
curvetype=expo
points=20,20
[mixer]
src=ELE
dest=Ch2
switch=DR1
usetrim=0
curvetype=expo
points=20,20

[channel3]
safetysw=Virt1
safetyval=-100
failsafe=-100
template=complex
[mixer]
src=THR
dest=Ch3
switch=DR0
scalar=70
offset=-30
[mixer]
src=THR
dest=Ch3
switch=DR1
usetrim=0

[channel4]
template=complex
[mixer]
src=RUD
dest=Ch4
switch=DR0
scalar=70
curvetype=expo
points=20,20
[mixer]
src=RUD
dest=Ch4
switch=DR1
usetrim=0
curvetype=expo
points=20,20

[channel5]
template=simple
[mixer]
src=GEAR0
dest=Ch5
curvetype=expo
points=0,0

[channel6]
template=expo_dr
[mixer]
src=MIX0
dest=Ch6
curvetype=expo
points=0,0
[mixer]
src=MIX0
dest=Ch6
switch=MIX1
scalar=0
curvetype=expo
points=0,0
[mixer]
src=MIX0
dest=Ch6
switch=MIX0
curvetype=expo
points=0,0

[channel7]
template=simple
[mixer]
src=DR0
dest=Ch7
curvetype=expo
points=0,0

[channel8]
template=expo_dr
[mixer]
src=FMODE0
dest=Ch8
curvetype=expo
points=0,0
[mixer]
src=FMODE0
dest=Ch8
switch=FMODE1
scalar=0
curvetype=expo
points=0,0
[mixer]
src=FMODE0
dest=Ch8
switch=FMODE0
curvetype=expo
points=0,0

[virtchan1]
name=Virt1
template=complex
[mixer]
src=Virt1
dest=Virt1
usetrim=0
curvetype=min/max
points=0
[mixer]
src=THR
dest=Virt1
offset=-1
usetrim=0
muxtype=add
[mixer]
src=AIL
dest=Virt1
switch=MIX1
usetrim=0
curvetype=fixed
[mixer]
src=AIL
dest=Virt1
switch=MIX2
usetrim=0
curvetype=fixed

[trim1]
src=LEFT_V
pos=TRIMLV+
neg=TRIMLV-
[trim2]
src=RIGHT_V
pos=TRIMRV+
neg=TRIMRV-
[trim3]
src=LEFT_H
pos=TRIMLH+
neg=TRIMLH-
[trim4]
src=RIGHT_H
pos=TRIMRH+
neg=TRIMRH-
[timer2]
type=countdown
time=300
[telemalarm1]
source=Volt1
above=1
value=32
[datalog]
switch=None
rate=1 sec
[safety]
Auto=min
[gui-320x240]
V-trim=133,75,1
H-trim=6,220,3
V-trim=183,75,2
H-trim=191,220,4
Big-box=9,40,Ch3
Big-box=9,90,Timer1
Small-box=9,150,Timer2
Small-box=9,181,TelemV1
Bargraph=205,150,Ch3
Bargraph=235,150,Ch4
Bargraph=265,150,Ch2
Bargraph=295,150,Ch1
Model=206,40
Toggle=130,38,1,64,128,None
Toggle=168,38,2,65,129,None
Toggle=147,76,18,17,17,MIX
Toggle=147,115,11,12,0,Ch5
Toggle=147,153,15,16,0,DR
Toggle=147,192,14,13,13,FMODE
quickpage1=Telemetry monitor

I've also attached an updated toggle graphic I have been using to help with the testing. It includes icons for lights on, flip, noflip, stop, go, slow 70% and fast 100%. I will probably update this as time goes on as well.

thanks in advance for your help. Deviation rocks.

Deal57

18 Nov 2015 00:49 - 18 Nov 2015 00:52

Replied by Deal57 on topic Hubsan X4 H107L setup for Devo 7E?

Hubsan X4 H107L setup for Devo 7E?

Category: Model Requests

Here are some code snippets that should help. Presuming Channel 3 is the throttle channel, you set up a virtual channel to handle the "sticky throttle hold". Please use Search for "Sticky Throttle Hold" and you'll see some really awesome discussion and help on this topic.

On the Devo 6S I think most people use the GEAR switch rather than HOLD. You can choose whatever switch you are comfortable with. We are testing the code to add more switches to the 6S, so I put in a dedicated HOLD switch on my 6S now, along with additional trims and a couple other things. Gotta love this software!

[channel3]
safetysw=Virt1
safetyval=-100
failsafe=-100
template=simple
[mixer]
src=THR
dest=Ch3

...
[virtchan1]
template=complex
[mixer]
src=Virt1
dest=Virt1
usetrim=0
curvetype=min/max
points=0
[mixer]
src=Ch3
dest=Virt1
offset=-1
usetrim=0
muxtype=add
[mixer]
src=AIL
dest=Virt1
switch=HOLD1
usetrim=0
curvetype=fixed

barees63

17 Nov 2015 19:49

Replied by barees63 on topic Hubsan X4 H107L setup for Devo 7E?

Hubsan X4 H107L setup for Devo 7E?

Category: Model Requests

I'm afraid it's the blind leading the blind here, but I do know how to set the safety switch.. immediately under [channel3] add these two lines:

safetysw=HOLD1
safetyval=-100

You may have to replace HOLD1 with an unused switch from the 6S (I don't know anything about that model) but on the 7E this locks out the throttle when the HOLD switch is in the down position.

mellowvision

17 Nov 2015 07:14

Replied by mellowvision on topic Hubsan X4 H107L setup for Devo 7E?

Hubsan X4 H107L setup for Devo 7E?

Category: Model Requests

I'm looking for similar information. I have a Hubsan x4 107c, and a Devo 6s with devo6-v4.0.1-583c468.

The build has a hubsan model built in, and it will fly the quad, and I can toggle the leds with the gear switch. Supposedly one of the switches allows/dissallows autoflips, but I don't know which one, and haven't tested it with enough space to try flips. I don't care that much about flips really, but would like to know how to use the switches. On the radio, I was able to add the voltage telemetry to the display, and have been able to map switches on the display and add a custom icon... but have not been able to figure out how to make a throttle safety. I also found your model here and thought I'd ask what the key differences are between your ini and the stock one. I'm new to deviation, just trying to figure it all out. If you could help me make sense of the code, that would be great.

here is the code from my stock hubsan profile that is installed as model 2 on mine:

name=HUBSAN
mixermode=Advanced
[radio]
protocol=Hubsan4
num_channels=7
tx_power=10mW

[protocol_opts]
vTX MHz=5885
Telemetry=On

[channel1]
template=simple
[mixer]
src=AIL
dest=Ch1

[channel2]
template=simple
[mixer]
src=ELE
dest=Ch2

[channel3]
template=simple
[mixer]
src=THR
dest=Ch3

[channel4]
template=simple
[mixer]
src=RUD
dest=Ch4

[channel5]
template=simple
[mixer]
src=GEAR0
dest=Ch5
curvetype=expo
points=0,0

[channel6]
template=expo_dr
[mixer]
src=MIX0
dest=Ch6
curvetype=expo
points=0,0
[mixer]
src=MIX0
dest=Ch6
switch=MIX1
scalar=0
curvetype=expo
points=0,0
[mixer]
src=MIX0
dest=Ch6
switch=MIX0
curvetype=expo
points=0,0

[channel7]
template=simple
[mixer]
src=DR0
dest=Ch7
curvetype=expo
points=0,0

[channel8]
template=expo_dr
[mixer]
src=FMODE0
dest=Ch8
curvetype=expo
points=0,0
[mixer]
src=FMODE0
dest=Ch8
switch=FMODE1
scalar=0
curvetype=expo
points=0,0
[mixer]
src=FMODE0
dest=Ch8
switch=FMODE0
curvetype=expo
points=0,0

[trim1]
src=LEFT_V
pos=TRIMLV+
neg=TRIMLV-
[trim2]
src=RIGHT_V
pos=TRIMRV+
neg=TRIMRV-
[trim3]
src=LEFT_H
pos=TRIMLH+
neg=TRIMLH-
[trim4]
src=RIGHT_H
pos=TRIMRH+
neg=TRIMRH-
[timer2]
type=countdown
time=10
[datalog]
switch=None
rate=1 sec
[safety]
Auto=min
[gui-320x240]
V-trim=133,75,1
H-trim=6,220,3
V-trim=183,75,2
H-trim=191,220,4
Big-box=9,40,Ch3
Big-box=9,90,Timer1
Small-box=9,150,Timer2
Small-box=9,181,None
Bargraph=205,150,Ch2
Bargraph=235,150,Ch1
Bargraph=265,150,Ch3
Bargraph=295,150,Ch4
Model=206,40
Toggle=130,38,1,64,128,None
Toggle=168,38,2,65,129,None
Toggle=147,76,0,66,0,None
Toggle=147,115,0,67,0,None
Toggle=147,153,0,68,0,None
Toggle=147,192,8,71,0,None
quickpage1=Telemetry monitor

here's a bonus - an icon for the 107c.

Displaying 1 - 20 out of 99 results.

Time to create page: 0.158 seconds

Force desktop display

All Categories
News, Announcements and Feedback
- News & Announcements
- Feedback & Questions
Development
- Development
- Protocol Development
- Builds
General
- General Discussions
- Polls
- Tutorials
- Stock Firmware Help
- Marketplace
Model Configs, Templates, Skins
- Model Configs
- - Model Requests
- Model Icons
- - Color icons for DEVO 6, 8, 12
- - BW icons for DEVO 7E, 10, 12E
- - BW icons for DEVO F12E
- Model Templates
- Custom Layouts
- Custom Skins
- Translations