Advanced Search

For DEVO 8S - requires compatible Flysky module fitted ( www.deviationtx.com/repository/Documenta.../Flysky-to-Devo.pdf/ )

Protocol=Hubsan4
Number channels=4
Tx power=30mW

3 flight modes:

FMode D/R Expo

(Indoors)
0 - AILE 60% 20%
0 - ELEV 60% 20%
0 - RUDD 60% 0%

(Outdoors)
1 - AILE 80% 10%
1 - ELEV 80% 10%
1 - RUDD 80% 0%

(Outdoors 3D)
2 - AILE 100% 0%
2 - ELEV 100% 0%
2 - RUDD 100% 0%

Throttle hold "RUDD D/R" switch.

Hello
my X4 config :

2 mode
- 70% dualrate (rudder 60%), 25% expo --> green icon
- 100% dual rate, 0% expo (3D) --< yellow icon

throllte cut : RUD DR --> red icon

2 chrono throttle command

for model icon :
www.deviationtx.com/forum/model-icons/1081-hubsan-x4
i choise second icon rename x4.bmp

Hey, thanks for doing the work and posting this. It works great for me.

So both you guys modded your radios with that module?

with A7105-500m module for me

www.deviationtx.com/forum/how-to/1228-fl...le-with-pics-devo-8s

proteus wrote: with A7105-500m module for me

www.deviationtx.com/forum/how-to/1228-fl...le-with-pics-devo-8s

I use same modul with my Revell QG 550 and it works fine.
www.deviationtx.com/forum/3-feedback-que...upport?start=20#6027

modification config for deviationTX 3.0.0 and perso toggle.bmp

for toggle.bmp : www.deviationtx.com/forum/custom-skins/1...tion-icon-toggle-bmp

Anyone have the v2 hubsan x4? just wondering its possible to turn the lights on or off with a switch.

HeliBen wrote: Anyone have the v2 hubsan x4? just wondering its possible to turn the lights on or off with a switch.

Just got mine today. I'm also curious on how to get this working.

+1

Would be cool to be able to turn off LEDs and most importantly disable auto flip feature while keeping full throws.

I would be glad to help, I've got a hubsan x4 v2 transmitter and a 24MHz logic analyzer but I've no idea of how the A7105 works (looks like it's not SPI).

Maybe someone can give me some clues so I can tell the devs what are the frames to send ?

Just a guess: has someone tried to enable Ch5 or Ch6 and send different values at them ?
I've not tried by myself because that's my first day on devo10 / deviation (first thing I did was flashing deviation and installing a A7105 module ) after 4 years with a DX6i, programming deviation is a BIT more difficult, I still have a lot of things to figure out !

Thanks.

There are no ch5 and ch6 for the Hubsan as of yet, you cannot go above channel 4.

Ok thanks.

I took the plunge and I'm trying to figure out how it works.
Help is welcome
www.deviationtx.com/forum/protocol-devel...d-version-on-the-way

Looks like I found the 5th channel
www.deviationtx.com/forum/protocol-devel...ion-on-the-way#12552

I should have worder things differently: "there is no user accessible channel over 4 in the current implementation"

goebish wrote: Looks like I found the 5th channel
www.deviationtx.com/forum/protocol-devel...ion-on-the-way#12552

Attached is a profile for the Hubsan X4 v2 (H107-L):

it requires my patch in deviation for the leds and disable flips functions to work:
bitbucket.org/PhracturedBlue/deviation/p...l-for-hubsan-x4/diff
If you can't build it by yourself and can't wait it is included in the nightly build you might send me a PM and I'll send you the firmware for your TX.
Patch is now included in nightly build.

edit 2013-08-22: proper throttle curve and ail/ele/rud expos.

GEAR 0 -> lights on
GEAR 1 -> lights off

FMODE 0: 75% throws / 60% RUD, -10% expo AIL/ELE, +30% expo RUD
FMODE 1: 90% throws / 70% RUD, -10% expo AIL/ELE, +30% expo RUD flips disabled
FMODE 2: 90% throws / 70% RUD, -10% expo AIL/ELE, +30% expo RUD flips enabled

RUDD D/R 1 -> throttle cut

hello, i have a DEVO8S + deviationTX naughty build 3.0.0. I had download the model *ini below for my x4 v2 but it doesnt bind. blue light keep flashing and not go to a solid blue. Any idea ? ( i fly without any problem my nano QX + hoten X with deviation 3.0.0 naughty build and my devo8) . Thx for help

Do you have an additional A7105 module in your Devo 8 ?

If not then you can't bind with a hubsan X4 ....

i have not. thx you for the answer !

If you know how to handle a soldering iron this is not difficult to do at all.

Details here:
www.deviationtx.com/repository/Documenta...uleInstallation.pdf/

You can get the module for $10-$15 (ebay A7105 500m).

ok ! i will take a look. thx again