Advanced Search

Search by Keyword Keywords:

Search Options

Find Posts from

Sort Results by

Search at a specific date

Jump to Result Number

Search in Categories Also search in sub-categories

Search Results (Searched for: hubsan x4)

goebish

16 Apr 2014 15:00 - 16 Apr 2014 15:01

Replied by goebish on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Oh sorry, I thought I was talking in the dev thread

Download the profile here:
www.deviationtx.com/forum/protocol-devel...ion-on-the-way#12575

stringrazor

16 Apr 2014 15:18 - 16 Apr 2014 15:19

Replied by stringrazor on topic Hubsan X4 config

Thanks. I have tried variations on

[channel5]
template=simple
[mixer]
src=GEAR1
dest=Ch5
scalar=-100
curvetype=min/max
points=0

but haven't been able to get it to work. Hence, my question about whether the supporting code is there. I did just setup the build VM but haven't sussed it all out yet....

goebish

16 Apr 2014 15:21 - 16 Apr 2014 15:25

Replied by goebish on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

You don't need to build it by yourself, the code has been there for a long time, more features have been cracked since then, even voltage telemetry is working now

(since 4.0.0)

Are you sure your profile is set for 6 channels ?

stringrazor

16 Apr 2014 18:00 - 16 Apr 2014 18:01

Replied by stringrazor on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Yes, The model is set for 6 channels. I am getting voltage telemetry but nothing I do seems to toggle the LEDs. I'm trying to use my extra switch, SW A. I see it in the channel monitor toggling between -100/100 so the switch is working but the setting never seems to toggle the LED.

[channel5]
template=simple
[mixer]
src=SW A1
dest=Ch5
scalar=-100
curvetype=min/max
points=0

I'm using the latest nightly build.

goebish

16 Apr 2014 18:03

Replied by goebish on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Hmmm stupid question: do you have a V2 H107, the one with leds on arms ?

stringrazor

16 Apr 2014 18:26 - 16 Apr 2014 18:27

Replied by stringrazor on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Found the profile in this post from the thread you referenced:

www.deviationtx.com/forum/protocol-devel...e-way?start=20#13064

It works fine. I'll use it as a base to figure out why my switch config isn't working. At least now I'm sure that I was doing something I'm doing wrong in the model vs. code missing.

Thanks for your help!

---- Gary ----

I was actually trying it with the 107C & ProtoX. It works with both.

Nikka

01 Jul 2014 15:36

Models for Devo 10 hubsan X4 107c/d and WLToys 272 was created by Nikka

Models for Devo 10 hubsan X4 107c/d and WLToys 272

Category: Model Requests

Hello,

I am new to this forum. I am looking for a models setup (model.ini) for hubsan X4 107c/d and WLToys 272, wich I can use with my Devo 10.

Please someone can help me ?

timmyd463229

01 Jul 2014 16:17

Replied by timmyd463229 on topic Models for Devo 10 hubsan X4 107c/d and WLToys 272

Models for Devo 10 hubsan X4 107c/d and WLToys 272

Category: Model Requests

Nikka wrote: Hello,

I am new to this forum. I am looking for a models setup (model.ini) for hubsan X4 107c/d and WLToys 272, wich I can use with my Devo 10.

Please someone can help me ?

for my devo 10 I used the file on massiverc site for the v212 and it works good but I put the flip channel on fmod 2 so it didn't automatically flip when I was in 100% rates on fmod 1 only flip with 100% rates in fmod 2

ToXic

07 Feb 2015 23:10

Hubsan x4 Devo 8s Model.ini request was created by ToXic

Hubsan x4 Devo 8s Model.ini request

Category: Model Requests

Hey guys,

I´ve a Devo 8s can anybody post the model.ini for an Hubsan X4 v1 h107.
I would like to set the flight mod to channel_5 and channel_6.

Sincerely
Alex

ToXic

10 Feb 2015 09:10

Replied by ToXic on topic Hubsan x4 Devo 8s Model.ini request

Hubsan x4 Devo 8s Model.ini request

Category: Model Requests

Sorry for the question flies no one a Hubsan with a devos 8s?

mwm

10 Feb 2015 19:27

Replied by mwm on topic Hubsan x4 Devo 8s Model.ini request

Hubsan x4 Devo 8s Model.ini request

Category: Model Requests

There are lots of hubsan x4 model.ini files for the 8s if you just search the forum for them .

DigitalMD

01 Apr 2015 03:38 - 01 Apr 2015 03:43

Replied by DigitalMD on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Here is my Hubsan X4 107L model file.
Controls LEDs
Displays TX power TX battery
Displays X4 battery voltage telemetry

improvements welcome. Enjoy.

Lukappaseidue

31 Aug 2015 16:39

Replied by Lukappaseidue on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

DigitalMD wrote: Here is my Hubsan X4 107L model file.
Controls LEDs
Displays TX power TX battery
Displays X4 battery voltage telemetry

improvements welcome. Enjoy.

Hi everybody.
Is this file good for HUBSAN H107C 2MP latest version?
Thank you very much

DigitalMD

31 Aug 2015 18:25

Replied by DigitalMD on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Flight characteristic should be fine, I don't have a 107C so I cannot test the camera functions.

goebish

31 Aug 2015 18:35

Replied by goebish on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

The camera function of the H107C is not controllable from the TX.

Lukappaseidue

31 Aug 2015 22:40 - 31 Aug 2015 22:41

Replied by Lukappaseidue on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

thank you for you reply

stringrazor

04 Sep 2015 02:29

Replied by stringrazor on topic Hubsan X4 config

Hubsan X4 config

Category: Model Configs

Actually, you can do a mod. or so I've read. There's a pad on the cam board marked KEY. I've read that if you wire it to the LED + you can toggle the cam on/off with the LEDs from the Tx.

barees63

04 Sep 2015 08:33

Hubsan X4 H107L setup for Devo 7E? was created by barees63

Hubsan X4 H107L setup for Devo 7E?

Category: Model Requests

Can anyone point me at a good model config for the V2 Hubsan X4 (w/leds) that is setup for the 7E?

I have downloaded one for the Devo 10 which works (I get voltage telemetry, it flies) but I'm not sure of the best way to map all the functions to the 7E switches, a working config to help me learn would be much appreciated

Thanks!
Bruce

barees63

05 Sep 2015 06:39 - 05 Sep 2015 06:40

Replied by barees63 on topic Hubsan X4 H107L setup for Devo 7E?

Hubsan X4 H107L setup for Devo 7E?

Category: Model Requests

FWIW, I found this one from 2013, added voltage telemetry, made HOLD1 the throttle safety switch and disabled auto-flip

throttle trim down toggles the LEDS and FMODE is mid/high rates.

I'm not sure why it says num_channels=4 when it is using 6 but it seems to work regardless?

Perhaps it will help someone else and If anyone has any suggestions on improving it for the latest deviation builds I'd be most grateful!

name=Hubsan X4
mixermode=Advanced
icon=HubsanX4.BMP
[radio]
protocol=Hubsan4
num_channels=4
tx_power=30mW

[protocol_opts]
vTX MHz=5885
Telemetry=On

[channel1]
template=expo_dr
[mixer]
src=AIL
dest=Ch1
scalar=75
curvetype=expo
points=0,0
[mixer]
src=AIL
dest=Ch1
switch=FMODE1
curvetype=expo
points=0,0

[channel2]
template=expo_dr
[mixer]
src=ELE
dest=Ch2
scalar=75
curvetype=expo
points=0,0
[mixer]
src=ELE
dest=Ch2
switch=FMODE1
curvetype=expo
points=0,0

[channel3]
safetysw=HOLD1
safetyval=-100
template=simple
[mixer]
src=THR
dest=Ch3

[channel4]
template=expo_dr
[mixer]
src=RUD
dest=Ch4
scalar=50
curvetype=expo
points=0,0
[mixer]
src=RUD
dest=Ch4
switch=FMODE1
scalar=60
curvetype=expo
points=0,0

[channel6]
template=simple
[mixer]
src=HOLD0
dest=Ch6
scalar=-100
curvetype=min/max
points=0

[virtchan1]
template=complex
[mixer]
src=AIL
dest=Virt1
scalar=0
curvetype=fixed

[trim2]
src=RIGHT_V
pos=TRIMRV+
neg=TRIMRV-
value=21,0,0
[trim3]
src=LEFT_H
pos=TRIMLH+
neg=TRIMLH-
[trim4]
src=RIGHT_H
pos=TRIMRH+
neg=TRIMRH-
value=13,0,0
[trim5]
src=Ch5
pos=TRIMLV-
step=192
value=-100,0,0
[timer1]
type=countdown
src=THR
time=300
[timer2]
src=THR
[telemalarm1]
source=Volt1
above=1
value=32
[safety]
Auto=min
[gui-128x64]
V-trim=58,10,1
H-trim=1,59,3
V-trim=65,10,2
H-trim=76,59,4
Small-box=2,20,Ch3
Small-box=2,31,Timer1
Small-box=2,42,TelemV1
Model=76,22
Battery=74,1
TxPower=102,1
Small-box=78,14,Ch7

mellowvision

17 Nov 2015 07:14

Replied by mellowvision on topic Hubsan X4 H107L setup for Devo 7E?

Hubsan X4 H107L setup for Devo 7E?

Category: Model Requests

I'm looking for similar information. I have a Hubsan x4 107c, and a Devo 6s with devo6-v4.0.1-583c468.

The build has a hubsan model built in, and it will fly the quad, and I can toggle the leds with the gear switch. Supposedly one of the switches allows/dissallows autoflips, but I don't know which one, and haven't tested it with enough space to try flips. I don't care that much about flips really, but would like to know how to use the switches. On the radio, I was able to add the voltage telemetry to the display, and have been able to map switches on the display and add a custom icon... but have not been able to figure out how to make a throttle safety. I also found your model here and thought I'd ask what the key differences are between your ini and the stock one. I'm new to deviation, just trying to figure it all out. If you could help me make sense of the code, that would be great.

here is the code from my stock hubsan profile that is installed as model 2 on mine:

name=HUBSAN
mixermode=Advanced
[radio]
protocol=Hubsan4
num_channels=7
tx_power=10mW

[protocol_opts]
vTX MHz=5885
Telemetry=On

[channel1]
template=simple
[mixer]
src=AIL
dest=Ch1

[channel2]
template=simple
[mixer]
src=ELE
dest=Ch2

[channel3]
template=simple
[mixer]
src=THR
dest=Ch3

[channel4]
template=simple
[mixer]
src=RUD
dest=Ch4

[channel5]
template=simple
[mixer]
src=GEAR0
dest=Ch5
curvetype=expo
points=0,0

[channel6]
template=expo_dr
[mixer]
src=MIX0
dest=Ch6
curvetype=expo
points=0,0
[mixer]
src=MIX0
dest=Ch6
switch=MIX1
scalar=0
curvetype=expo
points=0,0
[mixer]
src=MIX0
dest=Ch6
switch=MIX0
curvetype=expo
points=0,0

[channel7]
template=simple
[mixer]
src=DR0
dest=Ch7
curvetype=expo
points=0,0

[channel8]
template=expo_dr
[mixer]
src=FMODE0
dest=Ch8
curvetype=expo
points=0,0
[mixer]
src=FMODE0
dest=Ch8
switch=FMODE1
scalar=0
curvetype=expo
points=0,0
[mixer]
src=FMODE0
dest=Ch8
switch=FMODE0
curvetype=expo
points=0,0

[trim1]
src=LEFT_V
pos=TRIMLV+
neg=TRIMLV-
[trim2]
src=RIGHT_V
pos=TRIMRV+
neg=TRIMRV-
[trim3]
src=LEFT_H
pos=TRIMLH+
neg=TRIMLH-
[trim4]
src=RIGHT_H
pos=TRIMRH+
neg=TRIMRH-
[timer2]
type=countdown
time=10
[datalog]
switch=None
rate=1 sec
[safety]
Auto=min
[gui-320x240]
V-trim=133,75,1
H-trim=6,220,3
V-trim=183,75,2
H-trim=191,220,4
Big-box=9,40,Ch3
Big-box=9,90,Timer1
Small-box=9,150,Timer2
Small-box=9,181,None
Bargraph=205,150,Ch2
Bargraph=235,150,Ch1
Bargraph=265,150,Ch3
Bargraph=295,150,Ch4
Model=206,40
Toggle=130,38,1,64,128,None
Toggle=168,38,2,65,129,None
Toggle=147,76,0,66,0,None
Toggle=147,115,0,67,0,None
Toggle=147,153,0,68,0,None
Toggle=147,192,8,71,0,None
quickpage1=Telemetry monitor

here's a bonus - an icon for the 107c.

Displaying 61 - 80 out of 99 results.

Time to create page: 0.159 seconds

Re-enable mobile display

All Categories
News, Announcements and Feedback
- News & Announcements
- Feedback & Questions
Development
- Development
- Protocol Development
- Builds
General
- General Discussions
- Polls
- Tutorials
- Stock Firmware Help
- Marketplace
Model Configs, Templates, Skins
- Model Configs
- - Model Requests
- Model Icons
- - Color icons for DEVO 6, 8, 12
- - BW icons for DEVO 7E, 10, 12E
- - BW icons for DEVO F12E
- Model Templates
- Custom Layouts
- Custom Skins
- Translations