===== Blade 300x with AR7200BX BeastX =====

This is my first try at the AR7200bx. It works, but all I have done is low test hovers so far.  (partly due to weather)

Always check for reversed controls!  I don't have stock servos so you may need to reverse something.

RUD D/R switch is throttle hold...

60% rates on cyclic

Linear throttle curve

1 pitch curve (almost no negative pitch, 70% positive pitch)

This config is just for testing/hovering/normal flight. I wanted to make sure the AR7200Bx was working well with deviation.

[[ .:blade_300x_with_ar7200bx_beastx:b300x-ar7200bx ]] 


{{ .:blade_300x_with_ar7200bx_beastx:300x.bmp?64&direct }}