===== Eachine Racer 250/general purpose 6ch RX+CF/BF/OP =====

All files use 6 channels (DSMX protocoll, change it according to your RX)

Edit: forgot to mention they are for Devo 7e.

model8 is for Openpilot:

Channel 5 uses FMOD and HOLD to switch output between

a) -100 with FMOD0+HOLD0

b)      0 with FMOD1+HOLD0 or FMOD0+HOLD1

c)  100 with FMOD1+HOLD1

Channel 6 is a virtual pot on right horizontal trim to be used for inflight adjustments.

model10 and model11 are for cleanflight / betaflight:

Channel 6 is a virtual momentary 3-position switch on right horizontal trim to be used for inflight adjustments.

model10 (without switch mod on devo)

FMOD for 2 flightmodes and HOLD to activate Blackbox are mixed in channel 5, paste this into CLI to see how it is demuxed in the flightcontroler:

[code]aux 0 1 0 900 1500

aux 1 2 0 1500 2100

aux 2 25 0 925 1150

aux 3 25 0 1550 1700[/code]

model11 (with 3x2 switch mod)

SWB for 3 flightmodes, FMOD triggers blackbox and HOLD activates g-tune, again to be used with some aux-settings:

[code]aux 0 1 0 1725 2050

aux 1 2 0 1350 1650

aux 2 25 0 1175 1300

aux 3 25 0 1500 1650

aux 4 25 0 1900 2025

aux 5 20 0 1050 1100

aux 6 20 0 1200 1250

aux 7 20 0 1350 1400

aux 8 20 0 1500 1550

aux 9 20 0 1725 1775

aux 10 20 0 1900 1950[/code]

Don't hesitate to ask if something is unclear and leave a feedback if you like it. :lol:

[[ .:eachine_racer_250_general_purpose_6ch_rx_cf_bf_op:model11 ]] 

[[ .:eachine_racer_250_general_purpose_6ch_rx_cf_bf_op:model8 ]] 

[[ .:eachine_racer_250_general_purpose_6ch_rx_cf_bf_op:model10 ]] 


{{ .:eachine_racer_250_general_purpose_6ch_rx_cf_bf_op:racer250-2.bmp?64&direct }}