===== My Align T-Rex 450 + RX1002 + Devo 10 config file =====

Hi,

This is the config file I am using for my Airwolf, having a T-rex 450SE inside with a DEVO 10. It might not be the most professional config, but am flying this daily, so it works ;-)

Enjoy.

If you have some improvement ideas, please share B)

RX1002:

ELE: elevon servo: rear (outside on the left)

AIL: aileron servo: front, bottom.

THR: ESC

RUDD: Gyro

GEAR: no connect

AUX1: pitch servo: front, upper.

AUX2: Gyro gain

AUX3: no connect

AUX4: Gear servo (easier to reach...)

AUX5: no connect

Functions:

- 3 filght modes, curves by the T-rex manual FMOD

- "Sticky" throttle hold, RUDD D/R + Throttle lever to bottom first

- Slo mo gear for the Airfox body, GEAR

- Hover pitch adjust, ELEV D/R + AUX4

- 3 gyro sensitivity, 2 fixed Head hold, higher and lower, 3rd is live pot variable for setup, both rate + HH mode, MIX, AUX5

- 1 stop watch + 1 countdown, throttle start and AILE D/R reset

Screen:

- 4 trims

- left: stopwatch + count down

- right, from top: cyclic, throttle, gyro gain

[[ .:my_align_t-rex_450_rx1002_devo_10_config_file:wolf ]]