===== Syma X1 model and icon =====

Used a posting of a Hubsan X4 model as a starting point, and the icon is from a zip file someone posted here.  Will add credits if I can find them again.  Icon is for Devo7e/10.

Fmode0: very gentle

Fmode1: about the same as stock tx high rate

Fmode2: aggressive

Sticky throttle cut on Rudder DR1

Auto-flip enable on Trim_R- (Devo10, next to mix switch). Hold down, then cyclic in direction to flip.  It's a momentary switch set up according to the directions in the manual.

[[ .:syma_x1_model_and_icon:model2 ]] 


{{ .:syma_x1_model_and_icon:syma-x1.bmp?64&direct }}