===== Walkera QR X350 Configs for Devo 10 =====

I have finally taken the jump into Deviation with the new version 4 firmware.  So far it is spectacular!

I have created a couple of model configs for my QR X350 and wanted to share them here.

QRX350-multi D/R

Rudder, Elevator, Aileron Dual Rates all individually controlled via corresponding switch.  All set at 60% when switch is set to 1, both full and dual rate mode use +60 exponential.

Gear - 0 disables (-100%) throttle, 1 enables throttle

Mix (CH6) - 0 IOC disabled (100%), 1&2 IOC enabled (-100%) **not tested may be backwards

FMODE (CH5) - 0 Manual Mode (-100%), 1 Position Hold (0%), 2 Return to Home (100%)

Timer count down current set to 8 minutes and enabled when throttle is > -90%.

Timer count up enabled when throttle is > -90%.

Main screen customized to indicate status of D/R switches on top left; Gear, Mix and FMODE are reverse video as they are custom features.

QRX350-single D/R

Rudder, Elevator, Aileron Dual Rates all controlled via Rudder D/R switch.  All set at 60% when switch is set to 1, both full and dual rate mode use +60 exponential.

Gear - 0 disables (-100%) throttle, 1 enables throttle

Mix (CH6) - 0 IOC disabled (100%), 1&2 IOC enabled (-100%) **not tested may be backwards

FMODE (CH5) - 0 Manual Mode (-100%), 1 Position Hold (0%), 2 Return to Home (100%)

Timer count down current set to 8 minutes and enabled when throttle is > -90%

Timer count up enabled when throttle is > -90%.

Main screen customized to indicate status of Rudder D/R switch on top left; Gear, Mix and FMODE are reverse video as they are custom features.

[[ .:walkera_qr_x350_configs_for_devo_10:qrx350-multidr ]] 

[[ .:walkera_qr_x350_configs_for_devo_10:qrx350-singledr ]]