===== Removing an CC2500 module from a Skyartec 701 =====
\\
==== Step 1: Disassemble the NASA701 transmitter ====
The 1st step is to remove the back cover from the Skyartec transmitter.  Remove the 9 screws from the back of the transmitter as well as the rubber sides.

{{https://bitbucket.org/repo/Ag6rxe/images/1228172329-skyartec%20back.jpg}}

==== Step 2: Remove the CC2500 module ====
Using a soldering iron with solder wick or a solder-sucker remove all solder connections to the CC2500 module.  Removing enough solder to be able to remove the module will likely be difficult without wick or a sucker.

{{https://bitbucket.org/repo/Ag6rxe/images/2951049769-Skyartec%20inside.jpg}}