The following documents the hardware inside the Devo-F12E transmitter
Note: This is still in development. Anything with strike-through is incorrect/not verified
Pin | Description |
---|---|
BOOT0 | CON2 |
NRST | Debugger (NRESET) |
Pin | Description |
---|---|
0 (ADC123_0) | AUX 7 |
1 | Buzzer |
2 | output to 0 to shut off Tx |
3 | power-switch in 'off' position (goes high on 'off') |
4 (ADC12_4) | AUX 6 |
5 (SPI1_SCK) | SPI Flash |
6 (SPI1_MISO) | SPI Flash |
7 (SPI1_MOSI) | SPI Flash |
9 (USART1_TX) | Trainer Rx |
10 (USART1_RX) | Trainer Tx |
11 (USBDM) | USB+ |
12 (USBDP) | USB- |
13 (SWDIO) | Debugger SWDIO (TMS) |
14 (SWCLK) | Debugger SWCLK (TCK) |
Pin | Description |
---|---|
0 (ADC12_8) | AUX 5 |
1 | Backlight PWM control |
2 (BOOT1) | SPI Flash Chip-Select |
4 | Button Matrix Col 1 |
5 | Button Matrix Col 2 |
6 | I2C1_SCL (LCD) |
7 | I2C1 SDA (LCD) |
8 | Button Matrix Col 3 |
9 | Button Matrix Col 4 |
10 | USB Enable (enable Low) |
11 | TxModule pin 10 - CYRF6936 Reset |
12 (SPI2_NSS) | TxModule pin 1 |
13 (SPI2_SCK) | TxModule pin 3 |
14 (SPI2_MISO) | TxModule pin 9 |
15 (SPI2_MOSI) | TxModule pin 7 |
Pin | Description |
---|---|
0 (ADC123_IN_10) | AUX 4 |
1 (ADC123_IN_11) | Left Horizontal Stick |
2 (ADC123_IN_12) | Right Vertical Stick |
3 (ADC123_IN_13) | Right Horizontal Stick |
4 (ADC12_IN_14) | Battery Voltage |
5 (ADC12_IN_15) | Left Vertical Stick |
6 | Gear Switch |
7 | Elevator D/R Switch |
8 | Rudder D/R Switch |
9 | FMode 0 Switch |
10 | FMode 2 Switch |
11 | Aileron D/R Switch |
12 | Mix 0 Switch |
13 | Mix 2 Switch |
Pin | Description |
---|---|
2 | Vibrator |
8 | Video Channel 4 |
10 | Video Channel 5 |
Pin | Description |
---|---|
2 | Button Matrix Row 1 |
3 | Button Matrix Row 2 |
4 | Button Matrix Row 3 |
5 | Button Matrix Row 4 |
6 | Button Matrix Row 5 |
7 | LCD Reset |
8 | Video Channel 1 |
9 | Video Channel 2 |
10 | Video Channel 3 |
11 | Video AV On/Off |
12 | ??? E12,E13,E14 are related |
13 | ??? E12,E13,E14 are related |
14 | ??? E12,E13,E14 are related |
The battery voltage (ADC1_14) is calculated by the formula:
V = 0.0021x + 0.3026
B.6 | B.7 | B.8 | B.9 | |
---|---|---|---|---|
E.2 | L- | Rudder Trim Left | Top Left Trim Down | NC |
E.3 | Aileron Trim Right | Rudder Trim Right | Top Left Trim Up | Elevator Trim Up |
E.4 | Aileron Trim Left | Ext | Top Right Trim Up | Throttle Trim Up |
E.5 | Ent | UP+ | Top Right Trim Down | Elevator Trim Down |
E.6 | R+ | DN- | NC | Throttle Trim Down |
FCCID: S29 DEVO-F12E