Blade Nano QX

This model was made by fabien for the Devo 8 with Deviation v3.0

I converted the v3 model to v4 and added my custom GUI layout which will work on all these transmitters: DEVO 6/6S/8/8S/10/12/12S.

* This model will work on the Devo 7e but due to there is one less flight mode on that model you will not have all three flight modes FMOD0 - FMOD1 - FMOD2.

You will only have FMOD0 - FMOD1.

FMOD0: Stability mode

FMOD1: Agility mode/ 70% dual rate

FMOD2: Agility mode/ 100% dual rate

The v4 model was test flow by Syrabane.

http://deviationtx.com/forum/6-general-discussions/2644-hey-guys-seeking-help-with-my-devo-10#18793

model15_2014-01-20_2014-01-20

Here is the post by fabien for his v3 model if you want to see his settings he used or download the model for v3.

http://deviationtx.com/forum/model-configs/1933-nano-qx-from-horizon?start=20#12197

Download the Configuration Settings File.

Right click the “model.ini ” and select “Save Target As” or “Save Link As” depending if you are using IE or Firefox.

Install the configuration settings file into your models folder (See my How to video below).

This will over-right the current file so make sure that model slot doesn’t

have a model being used in it. If it does rename the configuration settings file

to another number that you have free.

Example: The file you downloaded is named model5 so change the “5“ to another slot

number that you don’t have a model setup for. If you have model slot 6 open rename the file to model6

How to Import/Export Deviation Firmware Models

http://youtu.be/aXkvtbCXzsk

-