Here are initial Settings for the Hobby King Assault Reaper 500 (like Stingray 500).
The Settings are like the settings from the manual with small improvements:
- If you switch the flight mode the Reaper will not jump or fall.
- The Hold=1 switches off the motor (for configuration and starting and crash)
- The ELEV D/R sets the sensitivity of Ele and Aile (mid low - high)
- Mix Switch regulates the Gyro (80%/70%/50%) but this is not tested, I did not feel any difference. I Use an RX601 with Aux1 (Chan 5) to Aux1 (Reaper).
- The Timer is set to 7minutes, reset=TRN switch
I did not flip or things like this with the Reaper the settings are ok for hovering and regular drone flight.
Has anyone other settings so far?
I think with some small modifications in the ini File these Settings will work for other Devo models.