At the request of someone here the .ini file for the UM T-28 Trojan.
Settings:
Protocol: DSMX
THR trim all the way down (-110)
GEAR1 - throttle cut, value -110
1. ELE 65%, 100%, EXPO 15%
MIX THR → ELE, 3 point 0-8-18 to prevent pitch up on full THR
2. AIL 65%, 100%, EXPO 15%
3. RUD 100% 1-to-1 (rudder is weak on this one)
Timers:
1. Countdown 6:00, CH1 (THR)
2. Countdown 4:30, CH1 (THR)
4. Permanent, CH1 (THR)
Important note:
If you have an older version with AR6400 instead of AR6410, you will need to change protocol to DSM2.