Version 1.1.0 has been released on 2012-09-15.
Note that this version does not include a 'library' dfu.
To install when current firmware is Devention:
Download the firmware dfu for your transmitter and the 'filesystem' zip file
Unzip the 'filesystem' zip file
Install firmware dfu for your transmitter
Restart transmitter.
Windows should ask to format the drive. press 'Ok' to format
open the new 'Removable Drive' in Windows explorer
copy the contents of the 'filesystem' directory to the 'Removable drive'. Do NOT copy the directory itself!. The 'Removable Drive' should have the following in its root directory:
tx.ini
models
language
media
template
modelico
restart transmitter
To upgrade from a previous Deviation install:
Download the firmware dfu for your transmitter and the 'filesystem' zip file
Unzip the 'filesystem' zip file
Install firmware dfu for your transmitter
Restart transmitter holding down 'Ent' to enter USB mode
Open the new 'Removable Drive' in Windows explorer
copy the contents of the 'filesystem' directory to the 'Removable drive', but do NOT copy the 'models' directory. If you do, you'll lose all of your saved models! Also NOT copy the 'filesystem' directory itself!. The 'Removable Drive' should have the following in its root directory:
tx.ini
models
language
media
template
modelico
restart transmitter
NOTE: If you reboot and the screen is blank, you lilkely didn't install the filesystem properly. restart the Tx while holding 'ENT', and check the 'Removable Drive' Contents