Table of Contents

Removing an CC2500 module from a Skyartec 701


Step 1: Disassemble the NASA701 transmitter

The 1st step is to remove the back cover from the Skyartec transmitter. Remove the 9 screws from the back of the transmitter as well as the rubber sides.

1228172329-skyartec_20back.jpg

Step 2: Remove the CC2500 module

Using a soldering iron with solder wick or a solder-sucker remove all solder connections to the CC2500 module. Removing enough solder to be able to remove the module will likely be difficult without wick or a sucker.

2951049769-skyartec_20inside.jpg