User Tools

Site Tools


Joomla says you aren't logged in
building_the_multi-module

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
building_the_multi-module [2016/04/14 19:41]
PhracturedBlue created
building_the_multi-module [2017/01/23 00:21] (current)
FDR https
Line 6: Line 6:
  
 The board can be ordered from Oshpark here: The board can be ordered from Oshpark here:
-http://​oshpark.com/​shared_projects/​nNRSCkjI ​(V1.2) +[[https://​oshpark.com/​shared_projects/​nNRSCkjI|V1.2]] 
-or https://​oshpark.com/​shared_projects/​Df3iWl1J ​(V1.3<-- suggested+or [[https://​oshpark.com/​shared_projects/​Df3iWl1J|V1.3]] <-- suggested
  
 ==== Additional requirements ==== ==== Additional requirements ====
 ATTiny24A/​44A/​84A (must be the '​A'​ variant) ATTiny24A/​44A/​84A (must be the '​A'​ variant)
  
-NRF24L01: +[[http://​www.ebay.com/​itm/​400611170500|NRF24L01]]
-http://​www.ebay.com/​itm/​400611170500+
  
-A7105: +[[http://​www.ebay.com/​itm/​181091377178|A7105]] 
-http://​www.ebay.com/​itm/​181091377178 +or [[http://​www.ebay.com/​itm/​A7105-2-4G-Wireless-Module-CC2500-NRF24L01-MD7105-SY-Transceiver-AA-/​171154521980|no PA]]
-or (no PA): +
-http://​www.ebay.com/​itm/​A7105-2-4G-Wireless-Module-CC2500-NRF24L01-MD7105-SY-Transceiver-AA-/​171154521980+
  
-CC2500: +[[http://​www.aliexpress.com/​item/​CC2500-PA-LNA-wireless-module-far-distance-2-4G/​359941652.html|CC2500]] 
-http://​www.aliexpress.com/​item/​CC2500-PA-LNA-wireless-module-far-distance-2-4G/​359941652.html +or [[http://​www.skyartec.com/​ProductShow.asp?​ArticleID=1977|this one (needs antenna soldered)]]
-or this one (needs antenna soldered) +
-http://​www.skyartec.com/​ProductShow.asp?​ArticleID=1977+
  
-CYRF6936: +[[http://​www.digikey.com/​product-detail/​en/​AWA24S/​748-1003-ND/​1687150|CYRF6936]] 
-http://​www.digikey.com/​product-detail/​en/​AWA24S/​748-1003-ND/​1687150 +or [[http://​www.ehirobo.com/​walkera-wk-devo-s-mod-devo-8-or-12-to-devo-8s-or-12s-upgrade-module.html|the stock]]
-or +
-http://​www.ehirobo.com/​walkera-wk-devo-s-mod-devo-8-or-12-to-devo-8s-or-12s-upgrade-module.html+
  
-2mm pin headers +[[http://​r.ebay.com/​K8zPRJ|2mm pin headers]]
-http://​r.ebay.com/​K8zPRJ+
  
-If using the Skyartec module, you need 0.05" headers: +If using the Skyartec module, you need [[http://​r.ebay.com/​GlelB8|0.05" headers]]
-http://​r.ebay.com/​GlelB8+
  
 0.1" pin header (optional) 0.1" pin header (optional)
Line 70: Line 61:
  
 ==== Installation ==== ==== Installation ====
-The module can be installed as any other transceiver module.Installation instructions are can be found here: [[ModuleInstallation]]+The module can be installed as any other transceiver module. Installation instructions are can be found here: [[rf_module_installation|Module Installation]]
  
 ==== Programming ==== ==== Programming ====
Line 78: Line 69:
 **//NOTE: If you have any of the transceiver modules installed, you should use a 3.3V programmer (or use the DEVO programming method below) as the modules cannot take 5V input //** **//NOTE: If you have any of the transceiver modules installed, you should use a 3.3V programmer (or use the DEVO programming method below) as the modules cannot take 5V input //**
  
-You need to obtain the latest avr.hex file from here: http://​deviationtx.com/​downloads-new/​category/​4-multi-module+You need to obtain the latest avr.hex file from here: https://www.deviationtx.com/​downloads-new/​category/​4-multi-module
  
 Attach your multi-module board to the AVR programmer. ​ The relevant pins on the 8-pin header are: Attach your multi-module board to the AVR programmer. ​ The relevant pins on the 8-pin header are:
Line 99: Line 90:
 === Programming with a Devo transmitter === === Programming with a Devo transmitter ===
 You need to obtain the avr.hex file from here: You need to obtain the avr.hex file from here:
-http://​www.deviationtx.com/​repository/​Multi-Module/​+https://​www.deviationtx.com/​repository/​Multi-Module/​
  
 You also need a custom programming DFU for your transmitter from here: You also need a custom programming DFU for your transmitter from here:
-http://​www.deviationtx.com/​downloads-new/​category/​7-programmer-dfus#​+https://​www.deviationtx.com/​downloads-new/​category/​7-programmer-dfus#​
  
   - Install the programming DFU for your transmitter with the DFuSe USB Upgrade tool   - Install the programming DFU for your transmitter with the DFuSe USB Upgrade tool
building_the_multi-module.1460688091.txt.gz (305868 views) · Last modified: 2016/04/14 19:41 by PhracturedBlue