User Tools

Site Tools


Joomla says you aren't logged in
building_the_multi-module

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
building_the_multi-module [2016/04/15 07:25]
FDR [Additional requirements]
building_the_multi-module [2017/01/23 00:21] (current)
FDR https
Line 6: Line 6:
  
 The board can be ordered from Oshpark here: The board can be ordered from Oshpark here:
-[[http://​oshpark.com/​shared_projects/​nNRSCkjI|V1.2]]+[[https://​oshpark.com/​shared_projects/​nNRSCkjI|V1.2]]
 or [[https://​oshpark.com/​shared_projects/​Df3iWl1J|V1.3]] <-- suggested or [[https://​oshpark.com/​shared_projects/​Df3iWl1J|V1.3]] <-- suggested
  
Line 61: Line 61:
  
 ==== Installation ==== ==== Installation ====
-The module can be installed as any other transceiver module.Installation instructions are can be found here: [[ModuleInstallation]]+The module can be installed as any other transceiver module. Installation instructions are can be found here: [[rf_module_installation|Module Installation]]
  
 ==== Programming ==== ==== Programming ====
Line 69: Line 69:
 **//NOTE: If you have any of the transceiver modules installed, you should use a 3.3V programmer (or use the DEVO programming method below) as the modules cannot take 5V input //** **//NOTE: If you have any of the transceiver modules installed, you should use a 3.3V programmer (or use the DEVO programming method below) as the modules cannot take 5V input //**
  
-You need to obtain the latest avr.hex file from here: http://​deviationtx.com/​downloads-new/​category/​4-multi-module+You need to obtain the latest avr.hex file from here: https://www.deviationtx.com/​downloads-new/​category/​4-multi-module
  
 Attach your multi-module board to the AVR programmer. ​ The relevant pins on the 8-pin header are: Attach your multi-module board to the AVR programmer. ​ The relevant pins on the 8-pin header are:
Line 90: Line 90:
 === Programming with a Devo transmitter === === Programming with a Devo transmitter ===
 You need to obtain the avr.hex file from here: You need to obtain the avr.hex file from here:
-http://​www.deviationtx.com/​repository/​Multi-Module/​+https://​www.deviationtx.com/​repository/​Multi-Module/​
  
 You also need a custom programming DFU for your transmitter from here: You also need a custom programming DFU for your transmitter from here:
-http://​www.deviationtx.com/​downloads-new/​category/​7-programmer-dfus#​+https://​www.deviationtx.com/​downloads-new/​category/​7-programmer-dfus#​
  
   - Install the programming DFU for your transmitter with the DFuSe USB Upgrade tool   - Install the programming DFU for your transmitter with the DFuSe USB Upgrade tool
building_the_multi-module.1460730311.txt.gz (305831 views) ยท Last modified: 2016/04/15 07:25 by FDR