https://www.deviationtx.com/wiki/ 2026-04-29T13:54:00-0700 https://www.deviationtx.com/wiki/ https://www.deviationtx.com/wiki/lib/tpl/devowiki/images/favicon.ico text/html 2018-04-04T15:47:08-0700 Anonymous (anonymous@undisclosed.example.com) https://www.deviationtx.com/wiki/modulelist/3-in-1_module?rev=1522882028&do=diff 3-in-1 Module By installing this module in your Devo (with Deviation firmware installed) you can have 3 additional radios beyond the standard Devo CYRF module (which is factory-installed in all Walkera Devo transmitters) : the A7105, CC2500, and NRF24L01 modules are all contained in this single package and they will all use a common antenna connection, separate from the CYRF antenna. (Click on image for a close-up view. And click on the close-up view for a detailed view.) text/html 2017-02-13T21:16:13-0700 Anonymous (anonymous@undisclosed.example.com) https://www.deviationtx.com/wiki/modulelist/4-in-1_module?rev=1487049373&do=diff 4-in-1 Module By replacing the original CYRF module in your Devo with this module, you can get the full complement of modules that your Devo (with Deviation firmware installed) is capable of supporting: A7105, CC2500, NRF24L01, and CYRF6936 RF modules, all using the original antenna on your Devo. text/html 2016-04-14T20:05:06-0700 Anonymous (anonymous@undisclosed.example.com) https://www.deviationtx.com/wiki/modulelist/a7105?rev=1460689506&do=diff A7105 The A7105 module is necessary to support the Flysky protocol (also used by WLToys V911, V9x9, and Xeida 99×8) and the Hubsan X4 protocol. It is possible to scavenge this module from a WLToys Flysky protocol transmitter, an Xeida 99×8 transmitter, or to purchase it standalone. text/html 2017-03-18T03:16:05-0700 Anonymous (anonymous@undisclosed.example.com) https://www.deviationtx.com/wiki/modulelist/cc2500?rev=1489832165&do=diff CC2500 The CC2500 module is necessary to support the Skyartec and Frsky protocols. It is possible to scavenge this module from a Skyartec transmitter or to purchase it standalone. When searching ebay or aliexpress, searching for ‘CC2500 PA’ will often return reasonable results The small CC2500 is very small - about text/html 2016-04-15T12:00:43-0700 Anonymous (anonymous@undisclosed.example.com) https://www.deviationtx.com/wiki/modulelist/cyrf6936?rev=1460746843&do=diff CYRF6936 DEVO Link: <http://www.ehirobo.com/walkera-wk-devo-s-mod-devo-8-or-12-to-devo-8s-or-12s-upgrade-module.html> ---------- AWA24S Link: <http://www.digikey.com/product-detail/en/AWA24S/748-1003-ND/1687150> *4.0.1 and earlier: Connect 10->3.3v, 11->3.3v, 12->GND. Leave 3 and 4 floating After 4.0.1, connect 10->11->2 and 3->12 ---------- BuyChina Link: <http://www.buychina.com/items/2-4g-module-cyrf6936-pa-lna-module-cyrf6936-20dbm-module-uuruunslkhi> *4.0.1 and earlier:… text/html 2017-05-29T01:46:46-0700 Anonymous (anonymous@undisclosed.example.com) https://www.deviationtx.com/wiki/modulelist/multimod?rev=1496047606&do=diff MultiModule The MultiModule is a circuit-board + ATTiny AVR chip which can be used to control up to 4 modules on a Deviation Transmitter. The MultiModule requires Deviation 5.0.0 or later.. *If installing a 'DEVO' CYRF6936 module into the MultiMod, the 5.0V pin must be connected between the MultiMod and the Transmitter, otherwise it can be left floating* text/html 2016-10-16T22:44:42-0700 Anonymous (anonymous@undisclosed.example.com) https://www.deviationtx.com/wiki/modulelist/nrf24l01?rev=1476683082&do=diff NRF24L01 U.FL Antenna Link: <http://www.ebay.com/itm/400611170500> Clarification (Oct 17, 2016): The red CE pin must be held at 3.3 Volts so must be jumpered to the white 3.3V pin; there isn't a corresponding CE pin on the transmitter. ---------- XL24L01 Link: <http://www.ebay.com/itm/160763860120>