User Tools

Site Tools


Joomla says you aren't logged in
hardware:jumper_t12

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
hardware:jumper_t12 [2019/01/25 21:31]
PhracturedBlue created
hardware:jumper_t12 [2019/04/26 15:20]
goebish [FCC Report]
Line 1: Line 1:
 ~~TOC:3-4~~ ~~TOC:3-4~~
-===WIP: This is currently just a copy of the X9D page=== 
 ===== Jumper T12 Hardware Connections ===== ===== Jumper T12 Hardware Connections =====
 The following documents the hardware inside the Jumper T12 transmitter The following documents the hardware inside the Jumper T12 transmitter
Line 6: Line 5:
   * LCD Display: 128x64 B&​W ​ display   * LCD Display: 128x64 B&​W ​ display
   * Radio: Jumper 4-in-1 module plugged into the back of the transmitter   * Radio: Jumper 4-in-1 module plugged into the back of the transmitter
-  * Digital volume control: CAT5137 on i2c BUS 
   * 256kbit EEPROM: ST M24256   * 256kbit EEPROM: ST M24256
 +  * Volume control: LM4875 - Controlled via I2C potentiometer (TPL0401B?)
  
 ==== STM32 Connections ==== ==== STM32 Connections ====
Line 14: Line 13:
 === GPIOA === === GPIOA ===
 ^Pin               ​^Description ​             ^ ^Pin               ​^Description ​             ^
-|0                 ​|Stick RV                 | +|0 (ADC_IN_0) ​     ​|Stick RV                 | 
-|1                 ​|Stick RH                 | +|1 (ADC_IN_1) ​     ​|Stick RH                 | 
-|2                 ​|Stick ​LH                 | +|2 (ADC_IN_2) ​     ​|Stick ​LV                 | 
-|3                 ​|Stick ​LV                 | +|3 (ADC_IN_3) ​     ​|Stick ​LH                 | 
-|4                 ​|Audio ​DAC (???)          | +|4                 ​|Audio ​Out          | 
-|5                 ​|Switch ​C-                | +|5                 ​|Switch ​B_H                | 
-|6                 ​|POT L (Aux2) ​            | +|6 (ADC_IN_6) ​     ​|AUX5 POT             | 
-|7                 |PPM for external module ​ | +|7                 |Ext Module TX  | 
-|*8                 ​|Trainer plug detect ​     |+|8                 ​|Trainer plug detect ​     |
 |9                 |USB Vin                  | |9                 |USB Vin                  |
-|10                |PPM for FrSky Module ​    |+|10                |Int Module ​TX     |
 |11                |USB Data-                | |11                |USB Data-                |
 |12                |USB Data+                | |12                |USB Data+                |
-|13                |SWDIO (Pads on P12.2)    | +|13                |SWDIO (???)    | 
-|14                |SWCLK (Pads on P12.3) ​   | +|14                |PCBREV ​   | 
-|*15 (SPI3 CS)      |LCD C/S                  |+|15 (SPI3 CS)      |LCD C/S                  |
  
 === GPIOB === === GPIOB ===
 ^Pin             ​^Description ​        ^ ^Pin             ​^Description ​        ^
-|0               |POT R (Aux3)        | +|0 (ADC_IN_8   |AUX4 POT        | 
-|1               |Switch D-           | +|1               |LED Green           | 
-|2               |???                 | +|2               |S.Port Update PWR                 | 
-|3               |Switch E-           | +|3               |???           | 
-|4               |Switch E+           | +|4               |???           | 
-|5               |Switch A+           | +|5               |???           | 
-|6 (I2C SCL)     ​|EEPROM SCL(???)     | +|6 (I2C SCL)     ​|EEPROM SCL     | 
-|7 (I2C SDA)     ​|EEPROM SDA(???)     | +|7 (I2C SDA)     ​|EEPROM SDA     | 
-|8               |Backlight PWM       | +|8               |Haptic ​      | 
-|9 (I2C WP)      |EEPROM WP(???)      | +|9 (I2C WP)      |EEPROM WP      | 
-|10              |UART3 Tx            | +|10 (USART_3_TX) ​|Bluetooth ​Tx            | 
-|11              |UART3 Rx            | +|11 (USART_3_RX) ​|Bluetooth ​Rx            | 
-|12 (SPI2 CS)    |SD Card ChipSelect ​ |+|12 (SPI2 CS)    |SD Card Enable ​ |
 |13 (SPI2 SCK)   |SD Card SCK         | |13 (SPI2 SCK)   |SD Card SCK         |
 |14 (SPI2 MISO)  |SD Card MISO        | |14 (SPI2 MISO)  |SD Card MISO        |
Line 52: Line 51:
 === GPIOC === === GPIOC ===
 ^Pin            ^Description ​         ^ ^Pin            ^Description ​         ^
-|0              |Voltage detect ​      |+|0 (ADC_IN_10)  ​|Voltage detect ​      |
 |1              |Button 'Trim LHR' ​  | |1              |Button 'Trim LHR' ​  |
-|*2              |Buttom ​'Trim RVU' ​  | +|2              |Button ​'Trim RVU' ​  | 
-|*3              |Buttom ​'Trim RVD' ​  | +|3              |Button ​'Trim RVD' ​  | 
-|4              |Slider L (Aux4) ​     | +|4              |LED Blue      | 
-|5              |Slider R (Aux5) ​     | +|5              |LED Red      | 
-|6              |Power LED            | +|6              |Int Module PWR            | 
-|7              |Heartbeat ​(???)      | +|7              |Heartbeat ​     | 
-|*8              |Trainer PPM In       | +|8              |Trainer PPM In       | 
-|*9              |Trainer PPM Out      | +|9              |Trainer PPM Out      | 
-|*10 (SPI3 SCK)  |I2S_Audio ​SCK(???)   | +|10 (SPI3 SCK)  |LCD SCK   | 
-|*11             |LCD A0               | +|11             |LCD A0               | 
-|*12 (SPI3 SD)   |I2S_Audio SD(???​) ​   | +|12 (SPI3 SD)   |LCD MOSI    | 
-|13             |Buttom 'Trim RH +' ​  |+|13             |???   |
 |14             ​|XTAL ​                | |14             ​|XTAL ​                |
 |15             ​|XTAL ​                | |15             ​|XTAL ​                |
Line 71: Line 70:
 === GPIOD === === GPIOD ===
 ^Pin  ^Description ​            ^ ^Pin  ^Description ​            ^
-|0    |Power ​shutdown ​         | +|0    |Power ​on          | 
-|1    |Power ​switch postition ​ | +|1    |Power ​button press  | 
-|*2    |Button '​Exit' ​          | +|2    |Button '​Exit' ​          | 
-|*3    |Button '​Page' ​          | +|3    |Button '​Page' ​          | 
-|4    |Sport Enable(???​) ​      | +|4    |Telemetry Dir       | 
-|5    |Sport Tx(???​) ​          | +|5    |Telemetry TX           | 
-|6    |Sport Rx(???​) ​          | +|6    |Telemetry RX           | 
-|*7    |Button '​Menu' ​          | +|7    |Button '​Menu' ​          | 
-|8    |???                     |+|8    |Ext Module Pwr                     |
 |9    |SD Card Detect ​         | |9    |SD Card Detect ​         |
-|10   |LCD MOSI                | +|10   |???                | 
-|11   |LCD CLK                 | +|11   |Switch: C_L                 | 
-|*12   |LCD RST                 | +|12   |LCD RST                 | 
-|13   ​|LCD ​A0                  | +|13   ​|LCD ​Backlight ​                 | 
-|14   |LCD NCS                 | +|14   |Switch H                 | 
-|*15   |Trim LHL                     |+|15   |Button 'Trim LHL' ​                    |
  
 === GPIOE === === GPIOE ===
 ^Pin  ^Description ​        ^ ^Pin  ^Description ​        ^
-|0    |Switch ​A-           | +|0    |Switch ​C_H           | 
-|1    |Switch ​B+           | +|1    |Switch ​D_L           | 
-|2    |Switch ​B-           | +|2    |Switch ​D_H           | 
-|*3    |Button 'Trim RHL' ​ | +|3    |Button 'Trim RHL' ​ | 
-|*4    |Button 'Trim RHR' ​ | +|4    |Button 'Trim RHR' ​ | 
-|*5    |Button 'Trim LVU' ​ | +|5    |Button 'Trim LVU' ​ | 
-|*6    |Button 'Trim LVD' ​ | +|6    |Button 'Trim LVD' ​ | 
-|7    |Switch ​D+           | +|7    |Switch ​A_L           | 
-|8    |Switch G-           | +|8    |???           | 
-|*9    |Button '​Plus' ​          | +|9    |Button '​Plus' ​          | 
-|*10   ​|Button '​Enter' ​      | +|10   ​|Button '​Enter' ​      | 
-|*11   ​|Button '​Minus' ​     | +|11   ​|Button '​Minus' ​     | 
-|12   |Button '​Minus' ​     | +|12   |Bluetooth Enable ​     | 
-|13   ​|Switch ​           |+|13   ​|Switch ​A_H            |
 |14   ​|Switch F            | |14   ​|Switch F            |
-|15   ​|Switch ​C+           ​+|15   ​|Switch ​B_L           |
- +
-==== Pad P12 ==== +
-^Pin  ^Description ​ ^ +
-|1    |3.3V         | +
-|2    |PA13         | +
-|3    |PA14         | +
-|4    |GND          ​|+
  
  
Line 124: Line 116:
  
 ==== FCC Report ==== ==== FCC Report ====
-FCCID: [[https://​www.fcc.gov/​general/​fcc-id-search-page|XYF X91216DK]]+FCCID: [[https://​www.fcc.gov/​general/​fcc-id-search-page|2ANTI-T12]]
hardware/jumper_t12.txt (58330 views) · Last modified: 2019/04/26 15:22 by goebish