DeviationWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Hisky FBL-80cp On Devo 10 / HT8 =====

This is my Hisky FBL-80cp configuration for the Devo 10 w/HT8 module. I started with the 6ch Helicopter template but made a lot of changes. Flight modes are based on my skill level. Transition between modes is smooth.

Channel Reverse:

1. ELE - Nor

2. AIL - Nor

3. THR - Rev

4. Rud - Nor

Scale   Expo

FMODE0 (Easy):

ELE    60      30

AIL    50      30

THR    100      -    7Point: -100/-70/-35/0/35/70/100

RUD    100      -

COL    75       -    7Point: -30/-20/-10/0/35/70/100

FMODE1 (Sport):

ELE    75       20

AIL    65       20

THR    100       -   7Point: -100/-70/-35/0/35/70/100

RUD    100       -

COL    80        -   7Point: -100/-70/-35/0/35/70/100

FMODE2 (Stunt):

ELE    90       20

AIL    80       20

THR    100       -    7Point: 100/93/86/80/86/93/100

RUD    100       -

COL    85        -    7Point: -100/-70/-35/0/35/70/100

NOTE: In Deviationtx, 6ch heli throttle curve of -100/-70/-35/0/35/70/100 with 0 pitch at 0% equiv to 0/17/34/50/67/84/100 with 0 pitch at 50%.

Model setup / Model type: / Heli

---> SwashType: 120

---> ELE (servo): Inverted

---> AIL (servo): Normal

---> COL(servo): Normal

---> ELE Mix: 60

---> AIL Mix: 50

---> COL Mix: 60

Sticky Throttle Hold is active on RUD DR0. Toggle icons indicate TH and FMODE status.

I would appreciate any feedback on this configuration.

regards . . . g

EDIT: I have changed my settings as listed below:

Fmode1 THR 7Point  90/85/82/80/82/85/90

Fmode2 THR 7Point  100/95/90/85/90/95/100

Col Mix 55

These settings were suggested by FyreSG on Rcgroups. Control is much smoother.

[[ .:hisky_fbl-80cp_on_devo_10_ht8:hf8d9199 ]]
DeviationWiki

User Tools

Site Tools

Page Tools
