Differences

This shows you the differences between two versions of the page.

--- modulelist:4-in-1_module [2016/12/01 14:10]
Arnold
+++ modulelist:4-in-1_module [2017/02/13 21:16] (current)
Arnold
@@ Line 3: / Line 3: @@
 By replacing the original CYRF module in your Devo with this module, you can get the full complement of modules that your Devo (with Deviation firmware installed) is capable of supporting: A7105, CC2500, NRF24L01, and CYRF6936 RF modules, all using the original antenna on your Devo.
-Shown below is the Devo 4-in-1 Module with the Devo daughter board, made specifically for the Devo line of radios. Once you plug it in to the existing socket (on Devos other than the 7E), only 3 more connections are needed from the board to the radio; one each for enabling the A7105, CC2500, and NRF24L01 components that are under the metal shield.
+Shown below is the Devo 4-in-1 Module with the Devo daughter board, made specifically for the Devo line of radios. Once you plug it in to the existing socket (on Devos other than the 7E), only 3 more connections are needed from the board to the controller; one each for enabling the A7105, CC2500, and NRF24L01 components that are under the metal shield. Click on an image for a detailed close-up view.
-Read post #55157 by Vlad_vy for guidance on soldering to various Devo radios.
+Read post #55157 by Vlad_vy [[https://www.deviationtx.com/forum/7-development/5434-3in1-4in1-rf-module?start=940#55157]] for guidance on soldering to various controllers, along with the associated hardware.ini file settings for enabling the modules in Deviation. **Note: You must __NOT__ be logged in to the Forum for the above link to work properly.
+**
 {{ :modulelist:20161104_233144.jpg?direct&300 |}}
 {{ :modulelist:20161104_233158.jpg?direct&300 |}}

DeviationWiki

User Tools

Site Tools

Differences

Page Tools