DEVO 10 : AUX4 & AUX5

Hi,
I've just downloaded ,compiled and installed the last (some hours ago) sunvsuv commit and have begin to play with deviation on my Devo 10
First of all, thanks for this wonderfull work!!
There is one thing I can't configure (or is a bug?).
This is about the Aux4 and Aux5 in DEVO Protocol, they are recognize as switches (and work) but not as potentiometers (proportional) ...
Is there any way to configure it the right way?
Another thing is how to configure "Throttle Hovering" and "Pitch Hovering" on the Left and Right Trim?
Thanks for your help.
Sorry for my frenglish.

During stick calibration, you have to do it for Aux4&5 as well:
1)Move 4 sticks , aux4 and aux 5 into their central position, then press ENT
2) Move All the 4 sticks and 2 AUX knobs from min to max postions, then press ENT
Once you see Calibration Done, you will get AUX4 and 5 work as proportional channels

suvsuv wrote: During stick calibration, you have to do it for Aux4&5 as well:
1)Move 4 sticks , aux4 and aux 5 into their central position, then press ENT
2) Move All the 4 sticks and 2 AUX knobs from min to max postions, then press ENT
Once you see Calibration Done, you will get AUX4 and 5 work as proportional channels

Hi suvsuv,
You are right! It works ...thank you.
A (very) small bug (but which may be hide a more serious futur one) :
Once we have the 'calibrate done.' message, if we continue by pressing the 'Ext' (not the 'Enter') button, we gat a 'strange mixed page'?
Press 'Ext' again to have a normal page.
Do I need to submit this small bug one the bug tracker ?

Thanks again.
PS: May be the message have to be : "Calibrate done, press 'Ent' to continue."

The bug you mentioned has been fixed 2 hours ago .

OK you are too much for me

May I give you a new (attached) release french language file ...


[EDIT] : sorry "Timer1:", "Timer2:" and "Press ENT to turn USB drive:" are well translate...I will give you a better lang.fr later.

@PB: OK I will ...thanks

Thanks FDR ,I will take a look on it.

suvsuv wrote: During stick calibration, you have to do it for Aux4&5 as well:
1)Move 4 sticks , aux4 and aux 5 into their central position, then press ENT
2) Move All the 4 sticks and 2 AUX knobs from min to max postions, then press ENT
Once you see Calibration Done, you will get AUX4 and 5 work as proportional channels

Many thanks to suvsuv I was trying to configure the Aux1 for hours on my F7 but after calibration and also turning the knob aux1 finaly worked proportional.