Display Gyro sense % on Devo12s screen

Hi,

I am running deviation 3.0.0 on my DEVO12s (on top I installed RBE's wide screen release cc895a) and want to display the gyro sensitivity rate on the screen.

Gyro sense is set to AUX2/CH7. When I select source "CH7" for a box on the screen, the value doesn't match what I have set in the configuration. I have mapped the gyro sense to the MIX switch.

Gyro sense is:
70 / 50 / 50 for 0 / 1 / 2 on the MIX switch. The data box on the screen shows 40% ? how come? What do I do wrong?

Thx,

Michael

There is a way to setup a virtual channel mixed with the aux2 ch to get a display of 0% -100%. I read it somewhere in this forum but cant remember where.

Thanks guys for pointing me to that... simply oversight on my side... I will search for the transformation to 0-100% scale.

Cheers,

Michael