- Posts: 280
conona
- Birdman
- Topic Author
- Offline
Less
More
28 Jul 2013 12:41 #12565
by Birdman
conona was created by Birdman
Hi all,
can Deviation be made to work with corona receivers?
Bm
can Deviation be made to work with corona receivers?
Bm
Please Log in or Create an account to join the conversation.
- Birdman
- Topic Author
- Offline
Less
More
- Posts: 280
28 Jul 2013 12:54 #12566
by Birdman
Replied by Birdman on topic conona
Corona rx uses cc2500 chip.
Bm
Bm
Please Log in or Create an account to join the conversation.
- sbstnp
- Offline
Less
More
- Posts: 649
28 Jul 2013 15:34 #12572
by sbstnp
Devo 10 + 4in1
Spektrum Dx9
FrSky Taranis + TBS Crossfire
Replied by sbstnp on topic conona
Corona 2.4Ghz is not widely used, so unless someone undertakes the job of describing the protocol (find info or reverse-engineer it) I don't think you'll see Deviation supporting it soon.
But who knows...
But who knows...
Devo 10 + 4in1
FrSky Taranis + TBS Crossfire
Please Log in or Create an account to join the conversation.
- Birdman
- Topic Author
- Offline
Less
More
- Posts: 280
29 Jul 2013 00:59 #12579
by Birdman
Debatable. There's more Corona around here than Nine eagles, Hubsan, Flysky or skyartec, but that's not why i am here.
From what i've read i have two choices,
use the Corona Tx module on trainer port
or send PB a Corona module, rx and request for protocol.
Is this correct?
Bm
Replied by Birdman on topic conona
sbstnp wrote: Corona 2.4Ghz is not widely used
Debatable. There's more Corona around here than Nine eagles, Hubsan, Flysky or skyartec, but that's not why i am here.
From what i've read i have two choices,
use the Corona Tx module on trainer port
or send PB a Corona module, rx and request for protocol.
Is this correct?
Bm
Please Log in or Create an account to join the conversation.
Time to create page: 0.037 seconds