walkera qr x350

hi,

i was flying my qr x350 with devo 12 standart.. normal,hold and coming home phase was on the MIX switch.

today my devo 12 gets the open firmware V 3.0 from this page...Thankss for it.

i testing my nano cpx an mcpx bl on it..it works perfectly. on bl must reduce the gain..i creating icons for quad, nano ,bl,and my t-rex 250. using tool from this forum.

on the quad QR x350 i put the mix switch to gear/K5 channel...gyro like!!

how many % gain i have to set to hold the position and how many to get the quad home????

i testing 0% 50% 100% but it feels wrong when i flying it.. at last i test 0% 35% and 90%
it feel not right ..

what is standart in % on mix channel with orginal firmware. ??

is it possible to get full screen??

if you like send via pm.

I flew my X350 with channel 5 set to -100, 0, +100% and the normal/ positon hold / return home works ok

cmPang

cmpang wrote: I flew my X350 with channel 5 set to -100, 0, +100% and the normal/ positon hold / return home works ok
cmPang

cmPang, would share your ini files with us?

Hi,

yesterday i test one time more the settings..

it works!! but..

first time i set 0% 50% and 100% and my copter flying wrong..



on the standart firmware was on the top position from switch the normalmode..in the mid pos. hold and down pos. coming home..

after change the firmware i try to flying with top position in normal mode but it was maybe the coming home.. that was and feel wrong.

now i set 100% 50% and 0% and now it works fine..
simply .....have to reverse the 5 channel



in travel ajust set -100% to +100%

thanks

is it possible to have full screen on my devo12??

fredbotton wrote:

cmpang wrote: I flew my X350 with channel 5 set to -100, 0, +100% and the normal/ positon hold / return home works ok
cmPang

cmPang, would share your ini files with us?

I love to but since I am using a variant of Deviation on 7e, that would not be comptaible