compatibility between TX DEVO 8S and RX-2618v

Start
Prev
1
Next
End

Casa
Topic Author
Offline

17 Oct 2013 10:26 #14719 by Casa

compatibility between TX DEVO 8S and RX-2618v was created by Casa

Hi,

i need your help please...
i have a rx-2806 and a rx-2618v and i use Tx wk-2602.
I'm thinking to buy the new TX DEVO 8S but i wouldn't replace my old rx!
So the question is....Are the rx-2806 and rx-2618v compatible with the DEVO 8S
transmittent??

best regards
Andrea

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

17 Oct 2013 12:35 - 17 Oct 2013 15:27 #14720 by rbe2012

Replied by rbe2012 on topic compatibility between TX DEVO 8S and RX-2618v

Both receivers are for the old Walkera protocol (WK260x, the six-channel- transmitters).
They are not compatible to the Devo8 with stock firmware (as this transmitter uses the new Devo protocol).

If you install our replacement firmware deviation on your new Devo8(s), you can control the new Devo receivers as well as the older Walkera receivers (and many more, see on the Home site).

Last edit: 17 Oct 2013 15:27 by rbe2012.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

17 Oct 2013 14:22 #14724 by Hexperience

Replied by Hexperience on topic compatibility between TX DEVO 8S and RX-2618v

I fly my 2702v on 2801 protocol. Works fine.

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

Casa
Topic Author
Offline

20 Oct 2013 14:29 #14808 by Casa

Replied by Casa on topic compatibility between TX DEVO 8S and RX-2618v

thanks very much for your suggestions....
so when i'll buy devo 8s i upgrade it with new firmware!!

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.044 seconds

Force desktop display