Skyartec Wasp 100 Nano CP/ X3V Flybarless

I want to make some models for the Skyartec Wasp but I need to know what the channels are for each one so I know what needs to be set to to normal and reverse.
I have the owners manuals for each one. They list the channels but don't list what each one is for. I checked the forums and internet but can't find out anything...


Skyartec Wasp 100 Nano CP


Ch 1 - aileron
Ch 2 - elevator
Ch 3 - not listed...guessing throttle like futaba...seems most Chinese companies use this order so far..
Ch 4 - rudder
Ch 5 - unknown...not listed..but more likely rudder gain
Ch 6 - pitch
Ch 7 - unknown - Gear



Skyartec Wasp X3V Flybarless

?

Thanks. I will make a couple models and post them. Someone will post if one of the channels Norm/Rev is not correct and I will make the corrections if needed.

Channel 5 is Gyro gain. What is channel 7 is used for? It is listed as Reversed in the owners manual.