Show me your bird!

Here's mine

Devo8s With 7 inch diversity lcd for fpv

The Dji F550 Stock setup with naza v2 +gps
Dji IOSD
Dji Groundstation and waypoint flying
Zenmuse H3-2d Gimbal with gopro3 white
200 mw 5.8 ghz vtx (wil be upgraded to 600 mw)

Blade 450 3D
Blade 120 SR
Blade MCX
Devo 7E

Whiplash 700 Gasser...

You can see the OrangeRX DSMX/Sbus receiver peaking out from under the canopy.
Flown with a Devo12. I've since gone to the dark-side and use a Futaba on this one.

An other bird in the nest
Trex 450SE/Sport/V2 custom mix + 5-blade head + 3GX + 2x DSMX sats

I recently put my larger birds on the wall. I shared this on the big SM sites, and commented that it meant something, but I'm not sure what. my son said that it meant I had more room on my desk.



Clockwise from the top:

• A 525-size DYI 3d-printed quad.
• Blade 350QX1
• Blade 200QX
• Blade 200SRX
• WLToys V959 (original 3-axis version).

It's missing the latest additions, a pair of lamas: Walkera 4F200LM and WLToys V915.

Build a Nano CP X Brushless in Logo Design.

The latest status of the fleet. Needless to say - all commanded by the D10.





Cheers,
bm

This is my micro fleet, and under the Hisky fuselage there is a Ladybird board. The frankenquad is another Walkera. Its what Im flying... there is a Hubsan X4 and a Ladybird somewhere in the house! And, of course, a 450 waiting for assembly. After wait almost a year for the incoming parts in the customs, I´m not in the mood.

PS: Thanks Hexperience, for a post about throttle and pitch curves that you made two years ago. I was thinking about sell my Super CP because it was trying to kill me, my dog and my wife! After months, I see your post today and the little beast is now under control! And sorry by my poor English...

And now my fleet floats!

https://goo.gl/photos/oyqB5m9dgF8P3ww89

The two Llama's mentioned earlier are now on the wall. The V959 is on the bench for dissection or a project, probably never to return. The 200QX now has a clear polycarbonate frame. And there's a V323 with the cafe steamers mod.

New breeds include the Sport Cub S, which I've flown with floats off of snow. Haven't tried it on water yet. And on the right there's an Orion, which has been wet. On the left is the top half of the mast and foresail for a Focus. All controlled with the D10 but the Focus, which is awaiting testing with the RTS Tx before converting to the D10.