A bug ?

Start
Prev
1
Next
End

Diaz
Topic Author
Offline
Keep flying!

13 Feb 2014 21:26 #20242 by Diaz

A bug ? was created by Diaz

Hello every one hope all are well. I'm using. Devo8s can any one tell why my walkera 450d01 an 3 are acting up using the deviation radio ? The tail servo starts jump and jitter and then Finley it losses speed almost dies out . When I use a regular devo 8 for the same helicopters it works fine the servo do not go crazy . Has any one experience this ? If any one can shed light it would be appreciated.

Erik

Erik

PhracturedBlue
Offline

14 Feb 2014 01:00 - 14 Feb 2014 01:47 #20248 by PhracturedBlue

Replied by PhracturedBlue on topic A bug ?

Are you using Deviaton, or is this with the stock firmware?

Maybe I should create a forum for stock-firmware discussions. There isn't another good place I'm aware of for such things, and we have a lot of expertise here.

Last edit: 14 Feb 2014 01:47 by PhracturedBlue.

vlad_vy
Offline

14 Feb 2014 03:10 #20250 by vlad_vy

Replied by vlad_vy on topic A bug ?

Probably you incorrectly set gyro gain for tail servo. Deviation use range -100% to +100%, others Tx usually use range 0 to +100%. In that case you need recalculate gyro gain to Deviation range.

Diaz
Topic Author
Offline
Keep flying!

14 Feb 2014 03:38 #20251 by Diaz

Replied by Diaz on topic A bug ?

Hello thank you for you're time I'm using the deviation no stock. Im also using the template that was found here in the forum. Is the one for the walkera 450d03 .. Thanks for your time. Let me know please .

Erik

Erik

Start
Prev
1
Next
End

Time to create page: 0.302 seconds