WL Toys V929

New here and wondering if the flysky protocol needs any kind of add on to fly. I have a WL Toys V929 and would like to bind it to my Devo 10 after I put the deviation firmware in it. Is this possible without a module or something , I don't even know what a module is. Any help would be appreciated.

deviationtx.com/repository/Documentation/
- User Manual Chapter 9
- Modulinstallation

deviationtx.com/ on the left side:
- "Supported Models"

bitbucket.org/PhracturedBlue/deviation/wiki/ModuleInstallation

It may be more simple to install a dsmx/dsm2 reciver into the V929. the cheapest 4channel I know of is a Lemon LOL ( just a thought ) all though with a module u will be able to fly any other Wl toys heli.

I don't know the WLtoys V929, but typically these micros have an all in one unit consisting of RX, control for Motor, and "stabilization system".

Without this "stabilization system" (gyros, accelerometer) it will be VERY challenging to fly

linux-user wrote: I don't know the WLtoys V929, but typically these micros have an all in one unit consisting of RX, control for Motor, and "stabilization system".

Without this "stabilization system" (gyros, accelerometer) it will be VERY challenging to fly

Yea you'r right and a blade 4n1 unit cost more than the heli in question ..