3x2 switch mod, need info on HARDWARE.INI

Hi !,

I've finished the 3x2 switch mod using Galee conection guide but I don't know what I have to put into my Hardware.ini file....

Here's mine:

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
; enable-cc2500 = A14
; has_pa-cc2500 = 1
enable-nrf24l01 = A14
has_pa-nrf24l01 = 1
; enable_switch = A13


I don't know if I have to modify it like this:

;switch_types: 3x2, 3x1, 2x2
extra-switches=3x2

Or like this:

switch_types: 3x2, 3x1, 2x2
extra-switches= 3x2


Thanks for the help

;switch_types: 3x2, 3x1, 2x2
extra-switches=3x2

is the correct way

Thanks !!!