Possibility of upgrading FW on new Flysky fs-i10 w

Hello all, I now have a new Flysky FS-i10 tx and it seems it is not capable of being upgraded with ER9X. So I was wondering if Deviation is a possibility without a ton of effort or digging into the programming to figure it out. Also if it is even worth it or not depending on the amount of time, effort and hardware changes(if needed). I will post some pics of the internals for you too look at and contemplate over once I open it up and look at it.

Here are some pics I have so far. If you need/want more or of something else,let me know.

pics didn't load, I will try again

OK, I will limit it to a pic of the processor pic. Thanks for letting me know, I thought I was doing something wrong.

Here we go

It seems that all the pics I took are larger than 2MB. I will try and find another way to take these pics and post later. I did post these pics over on the openrcforums.com site in the discussion on possibly upgrading to ER9X. Not possible, but I did see somewhere someone said that Deviation may be possible because of the lcd. Not sure where I read that. But maybe you guys can take a look and see what you think, if it's going to be too much hassle or not.

Use gimp or other.

Image-> resize...

openrcforums.com/forum/viewtopic.php?f=5&t=5199

Try this out and let me know if it works or not. Maybe you could go thru the whole thread and see what everyone has to say.