New White Devo 10

Jasen
Topic Author
Offline

28 Mar 2014 23:38 - 29 Mar 2014 03:54 #21919 by Jasen

New White Devo 10 was created by Jasen

Does anyone know if the white Devo10 will work Deviation 4.01? I have one on the way to replace my Devo8 that has some range issues.

Last edit: 29 Mar 2014 03:54 by Jasen.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

29 Mar 2014 00:55 #21922 by PhracturedBlue

Replied by PhracturedBlue on topic New White Devo 10

It has not been tested to my knowledge. It will depend on if they use a different firmware for the White or not. If they do, I do not recommend trying to install Deviation unless there is a firmware download available on Walkera.com

Please Log in or Create an account to join the conversation.

Jasen
Topic Author
Offline

29 Mar 2014 03:58 #21925 by Jasen

Replied by Jasen on topic New White Devo 10

Thanks for the reply, sorry about the typos. I will check out Walkera's website once its back online. I am going to be bummed if it does not work. I am a happy camper with this sweet firmware, and it would hard to go backwards. Plus my new P51 ultra would become a shelf queen.

Please Log in or Create an account to join the conversation.

victzh
Offline

29 Mar 2014 05:25 #21927 by victzh

Replied by victzh on topic New White Devo 10

May be you should replace radio module in your Devo8? Something like this:
www.rc711.com/shop/walkera-devention-upg...nsmitter-p-5972.html

They're out of stock but you've got the idea.

Please Log in or Create an account to join the conversation.

Jasen
Topic Author
Offline

29 Mar 2014 06:39 #21928 by Jasen

Replied by Jasen on topic New White Devo 10

I thought about that. The transmitter has the same issue when flying Hisky birds, using a nrf24l01 module.

Please Log in or Create an account to join the conversation.

victzh
Offline

29 Mar 2014 07:08 #21929 by victzh

Replied by victzh on topic New White Devo 10

May be you placed two antennas of the modules too close to each other? RF at 2.4GHz is a very peculiar thing - if these antennas are aligned, close to each other and their active parts overlap, they can reduce each other's efficiency severely.

Please Log in or Create an account to join the conversation.

Jasen
Topic Author
Offline

29 Mar 2014 17:59 - 29 Mar 2014 19:43 #21936 by Jasen

Replied by Jasen on topic New White Devo 10

Thanks guys for the replies, and help. I should have put this out before, the problem existed even before adding the new module. I have tried the module in different positions also. I thought it was an issue with my V120D02s' rx. Once I replaced the frame on the Master CP it had the same issue. I found a local user that test my Heli with his tx, and they did not have the issue anymore. I am thinking there may be an issue with whatever chip is boasting the power to to the transmitter modules. Another point to add is I can use my transmitter without issue using an HT8 module plugged into training/buddy box port.

Last edit: 29 Mar 2014 19:43 by Jasen.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

29 Mar 2014 23:31 #21942 by PhracturedBlue

Replied by PhracturedBlue on topic New White Devo 10

Because of how the radio works, it is not possible that there is anything wrong with the radio as a whole. It cannot sned a weak signal to the transceiver module. If both nrf24l01 and cyrf modules have short range they are either both damaged, interacting in some way, shielded inside the transmitter somehow, or you have huge amounts of 2.4GHz radiation surrounding them somehow. I can understand how frustrating it must be, and I would expect that a new radio will solve the issue (unless it is the aura of 2.4GHz radiation thing), but it likely wasn't necessary. Should you like to fix your Devo8 at some time, there are folks here who will walk you through systematically debugging the issue.

On the other hand, congrats on your new Devo10 purchase, I hope we can get it working with Deviation soon.

Please Log in or Create an account to join the conversation.

MassiveOverkill
Offline

30 Mar 2014 04:44 #21951 by MassiveOverkill

Replied by MassiveOverkill on topic New White Devo 10

I have 2 on the way. I guess we'll find out.

Please Log in or Create an account to join the conversation.

Jasen
Topic Author
Offline

12 Apr 2014 16:35 #22364 by Jasen

Replied by Jasen on topic New White Devo 10

Mine finally arrived yesterday.
The firmware is V0.7A/0.2, the same as the latest Black Devo10's firmware. It seems that it is just a new color, and possible antennae mode. The antennae looks just like any other 5db antennae. I had no problem flashing and running Deviation 4.01. Next step will be getting a nRF24L01+PA installed.

Please Log in or Create an account to join the conversation.

Mmon77
Offline

12 Apr 2014 16:39 #22365 by Mmon77

Replied by Mmon77 on topic New White Devo 10

Cool. Good to know that it's still the same TX basically, and most importantly, that Deviation still works on it!

Please Log in or Create an account to join the conversation.

cmpang
Offline

12 Apr 2014 19:14 - 12 Apr 2014 19:15 #22368 by cmpang

Replied by cmpang on topic New White Devo 10

My buddy takes a white to me for testing..

When I observed with my basic spectrum analyser, I see no difference in output power compared with my D10 and D7e. Interestingly, inside the power menu, the highest option for output is +20dBm which in contrast to what rumor has it that the white one has longer range ...

cmPang

Last edit: 12 Apr 2014 19:15 by cmpang.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

12 Apr 2014 21:41 #22371 by PhracturedBlue

Replied by PhracturedBlue on topic New White Devo 10

Not too surprising. Regulations basically limit them to 20dBm, and that is about the peak for all the PA I've seen on the market. They may be able to find more powerful ones, but the likelihood of being able to sell in the US at least is low. Since they didn't change the protocol, the only other thing they could reasonably do would be to improve the RF board design (improve efficiently) or alter the antenna design. I'd be interested in a pic of under the RF shield if anyone ever gives it a go.

Please Log in or Create an account to join the conversation.

cmpang
Offline

13 Apr 2014 02:32 #22374 by cmpang

Replied by cmpang on topic New White Devo 10

too bad that it doesn't belongs to me or I will do it otherwise...

Please Log in or Create an account to join the conversation.

sbstnp
Offline

13 Apr 2014 05:47 #22377 by sbstnp

Replied by sbstnp on topic New White Devo 10

Antenna looks to be in the ballpark of 5dbi as opposed to 3dbi on the black Devo10. My guess would be this is the only "improvement" made.

Devo 10 + 4in1
~~Spektrum Dx9~~
FrSky Taranis + TBS Crossfire

Please Log in or Create an account to join the conversation.

Jasen
Topic Author
Offline

13 Apr 2014 06:47 #22378 by Jasen

Replied by Jasen on topic New White Devo 10

PhracturedBlue wrote: Not too surprising. Regulations basically limit them to 20dBm, and that is about the peak for all the PA I've seen on the market. They may be able to find more powerful ones, but the likelihood of being able to sell in the US at least is low. Since they didn't change the protocol, the only other thing they could reasonably do would be to improve the RF board design (improve efficiently) or alter the antenna design. I'd be interested in a pic of under the RF shield if anyone ever gives it a go.

When I get my nRF24L01+PA in,and go to install it, I might give the shield removal a shot. My soldering skill are not that great, but it should be that difficult to put it back after i remove it

Please Log in or Create an account to join the conversation.

SeByDocKy
Offline

13 Apr 2014 07:01 #22379 by SeByDocKy

Replied by SeByDocKy on topic New White Devo 10

PhracturedBlue wrote: Not too surprising. Regulations basically limit them to 20dBm, and that is about the peak for all the PA I've seen on the market. They may be able to find more powerful ones, but the likelihood of being able to sell in the US at least is low. Since they didn't change the protocol, the only other thing they could reasonably do would be to improve the RF board design (improve efficiently) or alter the antenna design. I'd be interested in a pic of under the RF shield if anyone ever gives it a go.

Do you think is not also possible to reduce speed communication in order to increase RX sensibility of 6dBm ?

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

13 Apr 2014 07:23 #22382 by PhracturedBlue

Replied by PhracturedBlue on topic New White Devo 10

If they changed the protocol to reduce the speed (which is the only way to do it), it would mean a change to all receivers too. that hasn't happen, so the protocol hasn't changed (also, it uses the same firmware as the black)

Please Log in or Create an account to join the conversation.

vaibhav27
Offline

14 Jul 2015 13:45 - 14 Jul 2015 13:47 #35440 by vaibhav27

Replied by vaibhav27 on topic New White Devo 10

I need help please. I got the white devo 10.
I tried flashing the latest deviation software and on the first step itself I am having problems.
The first step is to press the ext button and switch on the tx with usb. I get a message "program update". And after that it does not move.
What do I do?
Please help me.
I am trying to get my Hcp100s airborne and I am having troubles. My heli doesn't respond properly. Can someone please send the settings o stock firmware as well please or maybe a ini file.
Thank you

Last edit: 14 Jul 2015 13:47 by vaibhav27.

Please Log in or Create an account to join the conversation.

TomPeer
Offline

14 Jul 2015 16:59 - 14 Jul 2015 16:59 #35448 by TomPeer

Replied by TomPeer on topic New White Devo 10

your tx is doing the exact right thing. your are skipping a few steps. usb part comes later.
first you have to instal the deviation firmware. for that you have to install the dfuse programm and download the deviation software.
to do that you need the tx to go in the program update mode.
when you have flashed the new firmware then you have to start up the tx while holding the ENT button; this is the usb part. now you have to format the usb and copy the needed files.

Last edit: 14 Jul 2015 16:59 by TomPeer.

Please Log in or Create an account to join the conversation.

Time to create page: 0.067 seconds

Force desktop display