Simulators

Start
Prev
1
Next
End

Worldofshiva
Topic Author
Offline

06 May 2014 15:36 #22944 by Worldofshiva

Simulators was created by Worldofshiva

Hello,
recently i've installed deviation in my devo7e that came with my supercp...
i wish to know if there is any simulator compatible with deviation(devo7e).
Thanks.
Greeting from india lol

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

06 May 2014 18:02 - 06 May 2014 18:03 #22949 by PhracturedBlue

Replied by PhracturedBlue on topic Simulators

Deviation is compatible with all simulators I know of. As long as you can plug your Tx into the PC (normally using the trainer port, but in smae cases USB is supported)

To use the trainer, you need to change the protocol to 'PPM' (or 'USBOut') and save the model to a new location. That should be all it takes to be detected by the simulator.

Last edit: 06 May 2014 18:03 by PhracturedBlue.

Please Log in or Create an account to join the conversation.

Worldofshiva
Topic Author
Offline

07 May 2014 01:38 #22953 by Worldofshiva

Replied by Worldofshiva on topic Simulators

So... i half got it

but could anyone tell me the exact procedure and settings that should be there in my TX?
and any free simulator either for mac or windows?
thanks

Please Log in or Create an account to join the conversation.

jegaoca
Offline

07 May 2014 02:38 #22954 by jegaoca

Replied by jegaoca on topic Simulators

I also have super-cp and devo 7e and I bought one that will not break the perfect place to practice helicopter and 3d. Phoenix RC www.banggood.com . Sorry for my English.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.032 seconds