WALKERA RX2618V-D

Start
Prev
1
Next
End

mwm
Topic Author
Offline

23 Oct 2014 21:03 #26155 by mwm

WALKERA RX2618V-D was created by mwm

I just got a 4F200LM, which uses the Walkera RX2618V-D receiver/gyro box.

I can't seem to get it into Heading Hold mode. Anyone out there using this with deviation? If so, could you let me know how to get it into HH mode?

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

mwm
Topic Author
Offline

24 Oct 2014 19:44 #26160 by mwm

Replied by mwm on topic WALKERA RX2618V-D

Figured it out with some help from the good folks at rcgroups.com.

The WK2618V-D is a 7 channel receiver, with gyro control on channel 7. I had configured things to be a 6 channel receiver, so it bound but the gyro just stayed in rate mode.

Another symptom of "not enough channels" is that the "bound" light on the Rx doesn't go on, even though the Rx is bound. Odd.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.045 seconds