Devo 7e pitch curve

Start
Prev
1
Next
End

Iroquois
Topic Author
Offline

04 Jan 2015 10:17 #27458 by Iroquois

Devo 7e pitch curve was created by Iroquois

I have a Devo 7e with Deviation Firmware. Can anyone tell me how to set up the pitch curve for a 140 degree swashplate system (Walkera 'Super CP').

Please Log in or Create an account to join the conversation.

jesmail
Offline

04 Jan 2015 11:40 #27461 by jesmail

Replied by jesmail on topic Devo 7e pitch curve

Go to the models section, there you will find working models for the Super CP from beginner to 3D advanced. You can use or learn from them to make your own.

Please Log in or Create an account to join the conversation.

FDR
Offline

04 Jan 2015 14:29 #27466 by FDR

Replied by FDR on topic Devo 7e pitch curve

Super CP nedds the 1 servo (normal) splash setting, which is the default.
You can setup the pitch curve on channel 6.

Please Log in or Create an account to join the conversation.

Iroquois
Topic Author
Offline

04 Jan 2015 22:40 #27494 by Iroquois

Replied by Iroquois on topic Devo 7e pitch curve

Thanks for that. It looks like I may take some time to work through the available info.

Please Log in or Create an account to join the conversation.

marky_mark
Offline

08 Feb 2015 01:50 #28444 by marky_mark

Replied by marky_mark on topic Devo 7e pitch curve

Surely the Super CP is a Normal not 140 deg swash!

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.034 seconds