Devo 8s with DSM2 and Multiwii - max throttle

Start
Prev
1
Next
End

Robert1917
Topic Author
Offline

28 May 2015 12:41 #33110 by Robert1917

Devo 8s with DSM2 and Multiwii - max throttle was created by Robert1917

I am using this controller and MulitWii 2.2 with my Devo 8s (Deviation 4.01) - it's DSM2
HK DSM2 controller

I maxed out the throttle in the TX but still the board is getting only to 1884 (instead of 2000).
Has someone experience with this combination? How can I max the Chanel value.

Thanks for your support

Robert

Please Log in or Create an account to join the conversation.

aMax
Offline

28 May 2015 13:48 #33117 by aMax

Replied by aMax on topic Devo 8s with DSM2 and Multiwii - max throttle

Throttle output is not equal to FC output to ESC....two very different animals...
Btw, ...1860 is full power for most ESC, only Afro ESC, as far as I know, are a little beyond that.

Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

28 May 2015 15:45 #33127 by vlad_vy

Replied by vlad_vy on topic Devo 8s with DSM2 and Multiwii - max throttle

Channel properties -> Scale- and Scale+ you can increase up to 125%. I think it's maximum value for DSM2/X protocol.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.032 seconds