7e NRF24L01 instalation failed "Missing modules"

More
13 Nov 2015 19:51 #40020 by Quad_Craze
Replied by Quad_Craze on topic 7e NRF24L01 instalation failed "Missing modules"
btw if you are reading your code horizontally it would look like
; has_pa-cc2500 = 1 enable-nrf24lo1 = A14 has_pa-nrf24lo1 = 1

*A14 or A13 whichever you are using

Please Log in or Create an account to join the conversation.

More
28 Nov 2015 02:59 - 28 Nov 2015 22:26 #40455 by Multirotor Go
Replied by Multirotor Go on topic 7e NRF24L01 instalation failed "Missing modules"
Ok so the problem was a defective module. I received a new one, the banggood one that do not come with antenna this time and installed it on my Devo 7e and is working. I have flown already many quad on different protocols. Very I am happy I must say.

Only thing different I did is that this time I didn't take of the pins on the module, and connected the cable to the module with the connectors.

The only problem I have now is that with Cheerson CX10 blueboard the quad flies flat, god yaw but flat pitch. How do I increase the rates? and also How do I flip Cx10 and syma JungCheng etc

Thanks
Last edit: 28 Nov 2015 22:26 by Multirotor Go.

Please Log in or Create an account to join the conversation.

Time to create page: 0.031 seconds
Powered by Kunena Forum