Missing UP+ and R+ can't navigate menus

Start
Prev
1
Next
End

krnmp
Topic Author
Offline

06 Jan 2016 21:13 #41450 by krnmp

Missing UP+ and R+ can't navigate menus was created by krnmp

Ran ok the past year, one day I get no response from up, r, third trim up and first trim right. Flashing and formatting didn't work. Using an nrf, which I'll pull out if there's no fix I'm missing.

Please Log in or Create an account to join the conversation.

mwm
Offline

06 Jan 2016 21:20 #41452 by mwm

Replied by mwm on topic Missing UP+ and R+ can't navigate menus

Could be a single bad solder joint, as the buttons are handled worth a matrix cross-connection. However, which are connected to what depends on the transmitter. Which are you using?

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

krnmp
Topic Author
Offline

06 Jan 2016 21:22 #41453 by krnmp

Replied by krnmp on topic Missing UP+ and R+ can't navigate menus

Please Log in or Create an account to join the conversation.

krnmp
Topic Author
Offline

09 Jan 2016 23:44 #41581 by krnmp

Replied by krnmp on topic Missing UP+ and R+ can't navigate menus

Yea it was the module, removed and I'm good.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.032 seconds