please help deviation newbie

DeeRod
Topic Author
Offline

14 Apr 2016 13:37 #46491 by DeeRod

please help deviation newbie was created by DeeRod

ok got my radio all put back together installed dfuse usb tool and ugraded to latest nightly build then i copy and pasted everything into my devo and got rid of the (-)'s on a7105 and on nrf24101 and now when i try to do model set up and choose v202 it just sais re init but dsm2 and dsmx say bind what could i have done wrong does this mean i installed my modules wrong or installed faulty ones any help would be great havent bin able too sleep cause of this thing

Please Log in or Create an account to join the conversation.

TheSFReader
Offline

14 Apr 2016 14:05 #46492 by TheSFReader

Replied by TheSFReader on topic please help deviation newbie

As far as I understand, bind and reinit are dependant on the protocol, so it's not necessarily an error that you get different values depending on the protocol you want to use.

If I have it right, Bind establishes a persistant bind between the Tx and the model, which would resume after both being restarted, while reinit is just the transmitter getting reinitialized and sending an initial sequence on which the model hooks up "until the next model power cutoff".

If the model/protocol you use needs a real bind, you would need to follow the binding procedure on both the Rx and the Tx.

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 14:31 #46493 by DeeRod

Replied by DeeRod on topic please help deviation newbie

ok soo if its not binding to the quad whats my problem then like too me it appears i have everything right if what your saying is tru the first protocols like devo,WK2801 ect.... dsm2, dsmx, and J6pro all say bind and all the toy brand quad protocals all say reinit and i cant get it too bind to my jj1000 is there some bind procedure im missing or did i mess up the install even though i checked for shorts with an ohm meter and continuity or did i muc up in the software install sorry im trying to give as much information as i can. if there is something else you need to know to help you help me please let me know. thank for your time guys

Please Log in or Create an account to join the conversation.

TheSFReader
Offline

14 Apr 2016 14:56 #46496 by TheSFReader

Replied by TheSFReader on topic please help deviation newbie

So, if I get it right, you enabled the nrf module, it's detected correctly (no warning at startup for a missing module ?), you configured the Tx to use a model with the V2x2 protocol. Right ?
As far as I understand, the procedure from there would be to power off the quad and the tx, power on the quad (which should signal it is ready to (pseudo)bind), and power on the tx.

Does that fail ?

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 15:03 #46497 by DeeRod

Replied by DeeRod on topic please help deviation newbie

Yes you are correct soo theres a warning for improper module install and/or faulty warning thats cool didnt know. Is there something else i can try?

Please Log in or Create an account to join the conversation.

TheSFReader
Offline

14 Apr 2016 15:14 #46498 by TheSFReader

Replied by TheSFReader on topic please help deviation newbie

If there are warnings of missing modules, it seems the custom here is to publish the hardware.ini file and post picturesof the modules installation/soldering so people can help you check where the fault might be.

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 15:42 #46499 by DeeRod

Replied by DeeRod on topic please help deviation newbie

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
; enablea7105 = A13
; has_paa7105 = 1
; enable-cc2500 = A14
; has_pa-cc2500 = 1
; enablenrf24l01 = A14
; has_panrf24l01 = 1
; enable-multimod = A13

is this right?

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 15:43 #46500 by DeeRod

Replied by DeeRod on topic please help deviation newbie

just soo i dont have to tear apart my transmitter right off the bat was a little tricky

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 16:35 #46501 by DeeRod

Replied by DeeRod on topic please help deviation newbie

and i just tried to put pictures up and every time i submit it just loads for a while then it bring me back to the forum and nothing got posted 2 times now man this stuff is frustration almost ready to smash this thing

Please Log in or Create an account to join the conversation.

FDR
Offline

14 Apr 2016 16:48 #46502 by FDR

Replied by FDR on topic please help deviation newbie

DeeRod wrote: and i just tried to put pictures up and every time i submit it just loads for a while then it bring me back to the forum and nothing got posted 2 times now man this stuff is frustration almost ready to smash this thing

There is a size and dimension limit, and it warns you about that , but the message is at the top of the page...
The limit is 1MB and probably 1024*1024px if I recall it well.

Please Log in or Create an account to join the conversation.

TheSFReader
Offline

14 Apr 2016 16:54 #46503 by TheSFReader

Replied by TheSFReader on topic please help deviation newbie

There is already one problem I spotted on your hardware.ini file : you ned to put back the '-' and supppress the ';' instead.

Additionally, since we can't (yet) see where you linked the csn for the two modules, we can't check if you didn't interchange them, in which case you would need to switch the 7105's A13 by the NRF's A14 and vice-versa You'll need to check that if the hardware.ini correction doesn't do the trick.

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 16:58 #46504 by DeeRod

Replied by DeeRod on topic please help deviation newbie

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 17:03 #46505 by DeeRod

Replied by DeeRod on topic please help deviation newbie

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 17:07 #46506 by DeeRod

Replied by DeeRod on topic please help deviation newbie

sorry what do you mean by suppress the *;*

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 17:12 #46507 by DeeRod

Replied by DeeRod on topic please help deviation newbie

ok now i have a missing a7105 so this means i messed up wiring correct? and by the way thank you very much you have been extremly helpful i thought all was lost :/

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 17:28 #46508 by DeeRod

Replied by DeeRod on topic please help deviation newbie

ok just to test and see if i could just use the nrf24101 module i unplugged my a7105 and put the ; back on where the a7105 is on the harware ini and it still sais missing a7105 module whats going on here?

Please Log in or Create an account to join the conversation.

magic_marty
Offline

14 Apr 2016 17:29 #46509 by magic_marty

Replied by magic_marty on topic please help deviation newbie

i think you need to remove the ; on the modules you installed ...mine looks like this i only have the NRF module installed...
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
; extended_audio: audiofx, dfplayer (dfplayer not supported yet)
;extended-audio=
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
; enable-a7105 = A13
; has_pa-a7105 = 1
; enable-cc2500 = A14
; has_pa-cc2500 = 1
enable-nrf24l01 = A13
has_pa-nrf24l01 = 1
; enable-multimod = A13

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 17:31 #46510 by DeeRod

Replied by DeeRod on topic please help deviation newbie

i was dumb to think that this wasnt going to be difficult deff a little over my head someone enlighten me lol

Please Log in or Create an account to join the conversation.

TheSFReader
Offline

14 Apr 2016 17:32 #46511 by TheSFReader

Replied by TheSFReader on topic please help deviation newbie

"suppressing the ';' "was remove the first character on the line (which happens to be ';' and makes the devo ignore the line --> the module's configuration.

As for the pictures, I've no good knowledge of transmitters other than the 7e, so will leave knowledgeable people ones give answer that part. (But liiks like we miss details on the color code you use, the "distribution board" you've made (that square thingie), the pins it's connected to on the tx's board.

Still, if only the 7105 module is found out as missing, you should be able to use your model (which uses the NRF module), I'd check that first.
(Make sure the modules have antenna on any time they are powered!)

Please Log in or Create an account to join the conversation.

DeeRod
Topic Author
Offline

14 Apr 2016 17:37 #46512 by DeeRod

Replied by DeeRod on topic please help deviation newbie

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
; enable-a7105 = A13
; has_pa-a7105 = 1
; enable-cc2500 = A14
; has_pa-cc2500 = 1
enable-nrf24l01 = A14
has_pa-nrf24l01 = 1
; enable-multimod = A13

Please Log in or Create an account to join the conversation.

Time to create page: 0.129 seconds

Re-enable mobile display

please help deviation newbie

Attachments:

Attachments: