- Posts: 32
Binding RTF emachine racer 250 to 7e
- kabo
- Topic Author
- Offline
Less
More
14 Jul 2016 18:48 #51642
by kabo
Binding RTF emachine racer 250 to 7e was created by kabo
so it's got the emachine ia6 aka fs ia6
tried to bind with binding plug in i1a6 to 7e no response/change from binding rapid flash of ia6
tried combos of plane/multi and dsm2 and dsmx al at 6 channel and id=123456
those of you u who have done this ... help!!!
love this bugger, got the walkera runner 250 the emachine kicks butt, anybody have a model file which makes the walkera close to the emachine
thanks Larry
tried to bind with binding plug in i1a6 to 7e no response/change from binding rapid flash of ia6
tried combos of plane/multi and dsm2 and dsmx al at 6 channel and id=123456
those of you u who have done this ... help!!!
love this bugger, got the walkera runner 250 the emachine kicks butt, anybody have a model file which makes the walkera close to the emachine
thanks Larry
Please Log in or Create an account to join the conversation.
- ursus69
- Offline
Less
More
- Posts: 143
14 Jul 2016 20:08 #51644
by ursus69
Replied by ursus69 on topic Binding RTF emachine racer 250 to 7e
The stock devo7e wont bind with the ia6. The ia6 is flysky protocol!
You need to install a module in the devo7e!
You need to install a module in the devo7e!
Please Log in or Create an account to join the conversation.
- Sero
- Offline
- RC-addicted
Less
More
- Posts: 106
14 Jul 2016 20:16 #51645
by Sero
A day without flying can't be called a day.
Replied by Sero on topic Binding RTF emachine racer 250 to 7e
That RX/ TX RTF-combo is not using DSM2/ DSMX...
A day without flying can't be called a day.
Please Log in or Create an account to join the conversation.
- kabo
- Topic Author
- Offline
Less
More
- Posts: 32
15 Jul 2016 23:23 #51734
by kabo
Replied by kabo on topic Binding RTF emachine racer 250 to 7e
Yea looks like the A7105, anybody recommend one on Amazon?
Please Log in or Create an account to join the conversation.
- kabo
- Topic Author
- Offline
Less
More
- Posts: 32
25 Jul 2016 00:42 #52109
by kabo
Replied by kabo on topic Binding RTF emachine racer 250 to 7e
oh gee wiz, I did not read your msg, installed the a7105 module, verified working with another quad that needs it, and your saying its not dsm2 or dsmx, the remote is the flysky emaching branded remote controller, ok then what ? help, I even with a7105 and selecting dsmx and discon the receiver and and powerup separate w/binding plug get nothing but rapid flash with 7e
Please Log in or Create an account to join the conversation.
- mwm
- Offline
25 Jul 2016 04:17 #52115
by mwm
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Replied by mwm on topic Binding RTF emachine racer 250 to 7e
Try selecting the FlySky protocol as recommended by ursus69.
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Please Log in or Create an account to join the conversation.
- kabo
- Topic Author
- Offline
Less
More
- Posts: 32
26 Jul 2016 09:36 #52160
by kabo
Replied by kabo on topic Binding RTF emachine racer 250 to 7e
tried flysky, no good, one thing I forgot to mention, this is not the ARF but the RTF version, it comes with the receiver, a flysky ia6/turgy ia6, I thing most folks responding are are putting their own receivers in, just need someone who has been sucessful with the RTF version.
Thanks Larry
Thanks Larry
Please Log in or Create an account to join the conversation.
- aMax
- Offline
Less
More
- Posts: 776
26 Jul 2016 10:21 - 26 Jul 2016 10:32 #52163
by aMax
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Replied by aMax on topic Binding RTF emachine racer 250 to 7e
You will need the AFHDS 2A protocol. (A7105)
I don`t know how far goebish on the development of this protocol is...
so this thread is for you.
www.deviationtx.com/forum/protocol-devel...-i6-it4?limitstart=0
Edit:
But why not use the IA6 tx?
I am quite sure, by default it will have far more range than the 7e with a A7105 module will have.
I don`t know how far goebish on the development of this protocol is...
so this thread is for you.
www.deviationtx.com/forum/protocol-devel...-i6-it4?limitstart=0
Edit:
But why not use the IA6 tx?
I am quite sure, by default it will have far more range than the 7e with a A7105 module will have.
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Last edit: 26 Jul 2016 10:32 by aMax.
Please Log in or Create an account to join the conversation.
- kabo
- Topic Author
- Offline
Less
More
- Posts: 32
28 Jul 2016 09:36 #52231
by kabo
Replied by kabo on topic Binding RTF emachine racer 250 to 7e
When I need the range I'll use the original controller, most everyday practice I do multiple quads as batteries expire it's nice to not have to get out all the remotes as well. I also go to the flying club on motorcycle and don't have all the space.
Please Log in or Create an account to join the conversation.
- ketsa
- Offline
Less
More
- Posts: 47
05 Aug 2016 19:49 #52480
by ketsa
Really ? Why ?
Replied by ketsa on topic Binding RTF emachine racer 250 to 7e
aMax wrote: I am quite sure, by default it will have far more range than the 7e with a A7105 module will have.
Really ? Why ?
Please Log in or Create an account to join the conversation.
Time to create page: 0.051 seconds
- Home
- Forum
- News, Announcements and Feedback
- Feedback & Questions
- Binding RTF emachine racer 250 to 7e