help lost models

Greetings to all, I apologize if the English is not correct but I use the google translator. I've just got a jumper t8sg plus v2. installing three new files of models I lost the three factory installed files. is it possible to reset the radio or someone could post them the original files? why were they deleted? does the jumper only support 30 models? Thanks in advance

www.deviationtx.com/downloads-new/category/13-nightly-builds

Here you can download the latest firmware you could flash ifyou want,using Walkera Defuse.

But inside each nightly download, you find also the default files and folder structure you can copy on your USB drive of the transmitter.

OK thank you very much! To copy files from the PC to the Jumper must necessarily use walkera dfuse? Maybe I lost the files because I did without?

When you update the firmware you want to copy the model, icon and hardware files before and put them back on the radio after updating.

Firmware, hex file you could flash it using Defuse flash tool, in that case you upgrade the firmware of the Tx and change features options etc.

In your case you can just acces, the USB drive of your Tx and copy the complete filestructure and or the models, icons sounds etc you like to add..

After flashing Firmware, filestructure still is in place, but it is a good habit to make hard copy of your setup and models on your pc.


Please use proper "disconnect USB device" in windows and not just unplug cable, there are chances of corrupting the drive. (and need for format and reupload all)

Ok, I want to recover the original file (I think it was of the drone x68) because with that I could use the simulator, liftoff and freerider. Now, with the models installed later, the commands are all wrong and I can not calibrate them ..