Jumper T8SG How to exit USB mode

Start
Prev
1
Next
End

Jaccomo
Topic Author
Offline

06 Jul 2020 19:48 - 06 Jul 2020 20:03 #76567 by Jaccomo

Jumper T8SG How to exit USB mode was created by Jaccomo

Recently I bought a Jumper T8SG plus.
I accidentally switched on the USB mode (ENT + Power On) The USB symbol appears on the screen.
After switching off and on again, the T8SG remains in USB mode. The question is: How can I disable USB mode. ?
I am now unable to use the transmitter to control my aircraft.
Thanks in advance.
Jaccomo.

Last edit: 06 Jul 2020 20:03 by Jaccomo.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

07 Jul 2020 05:28 #76569 by vlad_vy

Replied by vlad_vy on topic Jumper T8SG How to exit USB mode

It looks like you accidentally damaged transmitter filesystem. You need format transmitter USB drive (with Quick format option enabled) and copy to transmitter USB drive filesystem from any T8SG firmware archive.

www.deviationtx.com/downloads-new/category/13-nightly-builds

www.deviationtx.com/user-manual/user-manual-7e-10

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.030 seconds