Question about Devo8/12 signal icon

Start
Prev
1
Next
End

WheresWaldo
Topic Author
Offline

08 Jan 2014 19:42 #18242 by WheresWaldo

Question about Devo8/12 signal icon was created by WheresWaldo

Hey, having a Devo10 I have not thought much about signal strength, since I know what the particular model is set to with regard to transmitter power (mW). But I have a question on the Devo8/12, is the TX graph just a graphical representation of the setting for TX Power in each model file?

If so, then it is not a measure of dBm or RSSI. Is my understanding correct?

I want to understand the usefulness of making it a graphic instead of a value.

Please Log in or Create an account to join the conversation.

FDR
Offline

08 Jan 2014 20:18 #18243 by FDR

Replied by FDR on topic Question about Devo8/12 signal icon

Yes, each bar corresponds to a setting in the spinbox, i.e. one bar is 100uW, two bars are 300uW, three bars are 1mW ...and eight bars are 150mW

Please Log in or Create an account to join the conversation.

WheresWaldo
Topic Author
Offline

08 Jan 2014 20:45 #18245 by WheresWaldo

Replied by WheresWaldo on topic Question about Devo8/12 signal icon

Thanks

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.035 seconds