Turnigy TY-P1 25Amp HEXFET throttle calibration

Start
Prev
1
Next
End

matrixFLYER
Topic Author
Offline

18 Jan 2014 11:32 #18630 by matrixFLYER

Turnigy TY-P1 25Amp HEXFET throttle calibration was created by matrixFLYER

This is my problem:

www.rcgroups.com/forums/showthread.php?t=1601423

How can I setup my Devo 10 with deViation to fix this problem? I'm going crazy!

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

18 Jan 2014 12:24 - 18 Jan 2014 12:24 #18631 by vlad_vy

Replied by vlad_vy on topic Turnigy TY-P1 25Amp HEXFET throttle calibration

From ESC manual:

Setting Throttle Range
1. Disconnect the throttle lead from the receiver.
2. Apply Power to ESC.
3. Full Throttle
4. Connect the Throttle lead to the receiver.
5. One Beep sound.
6. Minimum Throttle.
7. Another Beep sound.

Last edit: 18 Jan 2014 12:24 by vlad_vy.

Please Log in or Create an account to join the conversation.

matrixFLYER
Topic Author
Offline

18 Jan 2014 13:30 #18632 by matrixFLYER

Replied by matrixFLYER on topic Turnigy TY-P1 25Amp HEXFET throttle calibration

I already did that thank you.

I made a video....i Hope to make something wrong

Please Log in or Create an account to join the conversation.

matrixFLYER
Topic Author
Offline

05 Feb 2014 17:18 #19880 by matrixFLYER

Replied by matrixFLYER on topic Turnigy TY-P1 25Amp HEXFET throttle calibration

Look like it works now. I made the calibration described in the manual of the ESC. A little bit different from standard ESC.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.040 seconds