- Posts: 12
SLT protocol? Do I need to add a hardware module?
- Tomcor
- Topic Author
- Offline
Less
More
20 Jan 2014 11:26 #18768
by Tomcor
SLT protocol? Do I need to add a hardware module? was created by Tomcor
I notice the new nightly has a SLT protcol. Is an added hardware needed for this to work? I have an Anylink unit already. Which I now i could use with the ppm protocol. Also is the Devo 7E and Devo 10 radio compatible with Anylink?
I have the spectrum cable with the built-in Life battery.
I have added 2 internal modules already in my 7E.
I have the spectrum cable with the built-in Life battery.
I have added 2 internal modules already in my 7E.
Please Log in or Create an account to join the conversation.
- Tomcor
- Topic Author
- Offline
Less
More
- Posts: 12
21 Jan 2014 00:29 #18811
by Tomcor
Replied by Tomcor on topic SLT protocol? Do I need to add a hardware module?
Well is does work on SLT. The modules i installed on my 7E did the trick. 1 v929 and 1 v262 modules from wltoys transmitters.
Now i can fly my 1sq vcam.
Now i can fly my 1sq vcam.
Please Log in or Create an account to join the conversation.
- victzh
- Offline
Less
More
- Posts: 1386
21 Jan 2014 06:31 #18821
by victzh
Replied by victzh on topic SLT protocol? Do I need to add a hardware module?
Just to clarify the situation for potential readers of this thread: what you called V262 module is an nRF24L01 or some clone of it, most probable Beken BK2423. And what you call V929 is A7105 module.
Glad it worked for you, BTW.
Glad it worked for you, BTW.
Please Log in or Create an account to join the conversation.
Time to create page: 0.045 seconds
- Home
- Forum
- General
- General Discussions
- SLT protocol? Do I need to add a hardware module?