X11 - Cannot trim Yaw

Start
Prev
1
Next
End

jimw1956
Topic Author
Offline

18 Feb 2016 20:16 - 18 Feb 2016 20:16 #43256 by jimw1956

X11 - Cannot trim Yaw was created by jimw1956

Hi, please excuse me if this it a stupid question, but I'm new to Deviation, so here goes:

I downloaded an ini file for the Syma X11 and copied it to my radio in the models folder.

It works very well, except that the quad wants to yaw to the left with the stick at center. Even if I go all the way to the right with the trim there is still a slight left yaw. I haven't noticed this with the stock transmitter.

Is there a setting in the .ini that I can correct this with?

Many thanks.

Last edit: 18 Feb 2016 20:16 by jimw1956. Reason: spelling

Please Log in or Create an account to join the conversation.

mwm
Offline

19 Feb 2016 02:01 #43273 by mwm

Replied by mwm on topic X11 - Cannot trim Yaw

Have you calibrated the Devo yet?

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

jimw1956
Topic Author
Offline

19 Feb 2016 03:24 #43280 by jimw1956

Replied by jimw1956 on topic X11 - Cannot trim Yaw

Thanks for the reply. After posting this I came across mention of that in another post. Did the stick calibration, and now it is perfect.
I'm loving deviation, so nice to be able to control so many models with so much ability to customize behavior.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.036 seconds