Cheap, small CC2500
- mwm
- Topic Author
- Offline
I've updated the Module List to include it.
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Please Log in or Create an account to join the conversation.
- dc59
- Offline
- Posts: 799
What's your output power setting?
100mw? Frsky protocol?
Thanks.
Please Log in or Create an account to join the conversation.
- victzh
- Offline
- Posts: 1386
I recently have seen this thing on eBay: www.ebay.com/itm/2-4GHz-Wireless-Transce...6:g:zqIAAOSwo3pWb9r6
They claim to have PA/LNA for under $4 ($6.50 with shipping).
Please Log in or Create an account to join the conversation.
- Arakon
- Offline
- Posts: 305
Edit: Damn.. they didn't hook up the GDO0 pin. That's needed.
Please Log in or Create an account to join the conversation.
- mwm
- Topic Author
- Offline
Get to the module list via links (in the left menu), then RF Module Installation Guide, then the ModuleList link.
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Please Log in or Create an account to join the conversation.
- dc59
- Offline
- Posts: 799
victzh wrote: @mwm, where is this Module List? I tried to find it myself but failed.
I recently have seen this thing on eBay: www.ebay.com/itm/2-4GHz-Wireless-Transce...6:g:zqIAAOSwo3pWb9r6
They claim to have PA/LNA for under $4 ($6.50 with shipping).
It looks pretty nice and very small with cheap price!
Please Log in or Create an account to join the conversation.
- Nitro_123
- Offline
- Posts: 95
I will report back if I buy one of these
Edit: Is it possible that if we tell them to include the gdo0 / gdo1 / the pins we need on later revisions of the board they'll do it ?
Like Arakon said midelic's implementation with this would be pretty tiny and full-featured
Please Log in or Create an account to join the conversation.
- mwm
- Topic Author
- Offline
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Please Log in or Create an account to join the conversation.
- Nitro_123
- Offline
- Posts: 95
Do they both have PA/LNA s ? ebay descriptions say one of them have a pa and that's all I can see.
Do we need the PAs / LNAs for telemetry ? Think so.
And can we connect an external antenna to these ? The PCB antenna's range will be an issue for me.
Edit: victzh's one looks more suitable for my purpose
Please Log in or Create an account to join the conversation.
- victzh
- Offline
- Posts: 1386
Please Log in or Create an account to join the conversation.
- mwm
- Topic Author
- Offline
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Please Log in or Create an account to join the conversation.
- Arakon
- Offline
- Posts: 305
Please Log in or Create an account to join the conversation.
- Nitro_123
- Offline
- Posts: 95
It might have a PA though.
Will it be able to run telemetry without a lna ?
I'm going to ask mwm's seller the same questions too
Will order chipworld chip. Need it for testing anyways.
Please Log in or Create an account to join the conversation.
- dc59
- Offline
- Posts: 799
item.taobao.com/item.htm?spm=a230r.1.14....=1&abbucket=5#detail
Please Log in or Create an account to join the conversation.
- Nitro_123
- Offline
- Posts: 95
I'm ordering one now if that's the case.
Thanks DC59
Will report back what happens
gyazo.com/e3d735666d6896c0840c23bf42928b05
Pic of conversation with seller. We were talking about this item :
www.ebay.com.au/itm/231784616230?euid=4c...Tags=exe=exe,ext=ext
Please Log in or Create an account to join the conversation.
- aMax
- Offline
- Posts: 776
The RFX2401C (PA/ LNA / switch ) is used on the F802 receivers ( frsky ) from BG and it does the job quite good.dc59 wrote: I found (victzh's one) it is announced that it dose HAVE PA+LNA on TaoBao.
item.taobao.com/item.htm?spm=a230r.1.14....=1&abbucket=5#detail
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Please Log in or Create an account to join the conversation.
- mwm
- Topic Author
- Offline
Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.
My remotely piloted vehicle ("drone") is a yacht.
Please Log in or Create an account to join the conversation.
- victzh
- Offline
- Posts: 1386
Please Log in or Create an account to join the conversation.
- Nitro_123
- Offline
- Posts: 95
Please Log in or Create an account to join the conversation.
- victzh
- Offline
- Posts: 1386
Sorry, probably I'm the source of all this confusion - mwm's module does NOT have PA/LNA - single blob of epoxy covering die directly mounted on PCB. What I mentioned is another module which has the same direct die mount blob but also has a separate chip - PA/LNA, you can even read on it "RFAXIS 2401C".
The problem with this second module is that we don't know how this PA/LNA connected to CC2500 - there should be control traces - you see them on the back of the module, but because it's epoxy blob you can't tell by photo where they lead to.
Please Log in or Create an account to join the conversation.
- Home
- Forum
- General
- General Discussions
- Cheap, small CC2500