Devo 10 controller rates

I was able to get my devo 10 to bind with my Syma x5 and Hubsan x4 and they fight characteristics improved greatly which is good. In the process of trying to set up additional switch functions it seems that they are both now in expert mode or at least it seems that way for the Hubsan x4. The yaw and aileron rates are unreal especially for the smaller Hubsan x4. Also with the X4 the lights sometimes work at binding during and stay functional for the duration of the flight but usually they are not functional. I looked at my Tx settings they are to my knowledge at baseline settings. I attempted to use some of the model configs that I found on deviation. Is there anything I inadvertently did to put them in hyper mode? Thanks anyone.

By default most protocols are built to 100%, so you can build a mixer to get multiple rates. Here is my Devo 6s ini for my Hubsan protoX. The switch names are a bit different, but the channels should work.

Try it!