clone channel

More
01 Aug 2016 17:41 - 01 Aug 2016 17:58 #52372 by mzakelj
clone channel was created by mzakelj
Hello

I have problem.

I need to have the channel 2 and 4 on same channel. So when i in dsm2 move alieron it move servo, and when i move rudder it move the same servo. The servo in channel 2.

Can somebody help me. Iam lost
Last edit: 01 Aug 2016 17:58 by mzakelj.

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 03:54 #52380 by RoGuE_StreaK
Replied by RoGuE_StreaK on topic clone channel
Channels are completely independent of inputs; they aren't tied to any specific physcial control, despite possibly the names you see on the channels (default names for a protocol).
Just define ch2 as having two sources, eg. in a Complex mixer set up two "pages", first with a SRC of rudder, the second with a SRC of AIL and set the 2nd mixer to "add". You'll likely need to scale your inputs (reduce the amount from each SRC), maybe add offsets, etc.

Please Log in or Create an account to join the conversation.

More
02 Aug 2016 06:59 #52381 by mzakelj
Replied by mzakelj on topic clone channel
Thanko you. I will try today. Iam new in deviation, i used futaba 9c before. And its all new to me. But is very great software. B)

Please Log in or Create an account to join the conversation.

Time to create page: 0.035 seconds
Powered by Kunena Forum